Not Nesting Right

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

User avatar
Thom Davies
Guru Member
Posts: 530
Joined: Tue, May 17 2005, 6:44PM
Company Name: Dawn Group
Country: NEW ZEALAND
Location: Christchurch New Zealand
Contact:

Not Nesting Right

Postby Thom Davies » Sun, Mar 03 2013, 9:31PM

Hi

Ive done a nest with cross grain doors. yet when it nests its not crossed grained the doors run with the grain. Its ticked in ecab as grain and in the nest. Im running V6 Build 10 and RN 5.59 patch 2

Cheers

Thom
[url=http://www.colinmcraesport.com]
Image
[/url]

Scott Marshburn
Guru Member
Posts: 759
Joined: Sat, Mar 05 2011, 7:29AM
Company Name: Heritage WoodWorks
Country: UNITED STATES
Location: Jacksonville Nc
Contact:

Re: Not Nesting Right

Postby Scott Marshburn » Mon, Mar 04 2013, 6:37AM

Thom You have to take the cabinet into door editor and right click then in construction settings change the slab grain direction angle from 0 to 90.Remove the door and then add it back.
Yes! Oh Yes! I Think We Are Going to make It!
https://www.youtube.com/user/ecabinetstips

User avatar
Brad McIntosh
Guru Member
Posts: 518
Joined: Wed, May 18 2005, 6:59PM
Company Name: CNC Automation
Location: St. Zotique, Québec, Canada
Contact:

Re: Not Nesting Right

Postby Brad McIntosh » Mon, Mar 04 2013, 11:48AM

Thom,

Just an "aside" - It is probably not related to your current issue, but you should probably apply PATCH 3 to your 5.59 Control Nesting installation.

Link to Download V5.59 Patch 3
Brad McIntosh
CNC Automation

Home: http://www.cncautomation.com
Twitter: @bmcncautomation

User avatar
Thom Davies
Guru Member
Posts: 530
Joined: Tue, May 17 2005, 6:44PM
Company Name: Dawn Group
Country: NEW ZEALAND
Location: Christchurch New Zealand
Contact:

Re: Not Nesting Right

Postby Thom Davies » Mon, Mar 04 2013, 8:29PM

It seems to be the grouping the doors together is a problem. Its ok when nesting in ecab, but as soon as its down at the machine it goes back to being straight grain.
[url=http://www.colinmcraesport.com]
Image
[/url]

User avatar
Thom Davies
Guru Member
Posts: 530
Joined: Tue, May 17 2005, 6:44PM
Company Name: Dawn Group
Country: NEW ZEALAND
Location: Christchurch New Zealand
Contact:

Re: Not Nesting Right

Postby Thom Davies » Mon, Mar 04 2013, 8:41PM

sweet!!!

Patch 3 fixed it! cheers guys!
[url=http://www.colinmcraesport.com]
Image
[/url]

User avatar
Brad McIntosh
Guru Member
Posts: 518
Joined: Wed, May 18 2005, 6:59PM
Company Name: CNC Automation
Location: St. Zotique, Québec, Canada
Contact:

Re: Not Nesting Right

Postby Brad McIntosh » Tue, Mar 05 2013, 9:13AM

Thom,

What I had meant to say in my original post was:

Just an "aside" - It is probably TOTALLY related to your current issue... you NEED TO apply PATCH 3 to your 5.59 Control Nesting installation.


:lol:
Brad McIntosh
CNC Automation

Home: http://www.cncautomation.com
Twitter: @bmcncautomation


Return to “eCabinet Systems Software”

Who is online

Users browsing this forum: No registered users and 25 guests