On the attached cabinet, the front row of shelf holes are 3/4" further in from the front edge, then their entered value. I can 'cheat' them to the correct spot, but it then throw off the corresponding holes on each of the backs. Is this just an error, I've never known why it would do this.
Also, shouldn't fasteners be applied where the 2 back pieces meet? I've applied RTA fitting globally to the cabinet, yet the 2 back pieces butt together. I always end up screwing them together, which isn't a big deal, but I'm not clear on why there isn't a joinery option for this joint.
Corner Cabinet Issues
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- eCabinets Beta Tester
- Posts: 491
- Joined: Wed, Apr 15 2009, 8:22PM
- Company Name: Plymouth Custom Closets
- Country: UNITED STATES
- Location: Plympton, MA
Corner Cabinet Issues
- Attachments
-
- 11.hsf
- (1.27 MiB) Downloaded 221 times
http://www.plymouthcustomclosets.com
Dell Precision 490/ Intel Xeon 3.20 Ghz/3 GB RAM/ Nvidia Quadro FX 3450/ Windows XP, sp 3
Dell Precision 490/ Intel Xeon 3.20 Ghz/3 GB RAM/ Nvidia Quadro FX 3450/ Windows XP, sp 3
-
- eCabinets Beta Tester
- Posts: 491
- Joined: Wed, Apr 15 2009, 8:22PM
- Company Name: Plymouth Custom Closets
- Country: UNITED STATES
- Location: Plympton, MA
Re: Corner Cabinet Issues
Thermwood?
http://www.plymouthcustomclosets.com
Dell Precision 490/ Intel Xeon 3.20 Ghz/3 GB RAM/ Nvidia Quadro FX 3450/ Windows XP, sp 3
Dell Precision 490/ Intel Xeon 3.20 Ghz/3 GB RAM/ Nvidia Quadro FX 3450/ Windows XP, sp 3