DRAWER BOX DEPTH

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

Post Reply
sheldon wohlgemuth
New Member
Posts: 3
Joined: Mon, Aug 22 2011, 5:12PM
Company Name: silverpine cabinets
Country: CANADA

DRAWER BOX DEPTH

Post by sheldon wohlgemuth »

Any ideas for me our slides require 540, 490, 440 lengths. With our regular drawers I set the depth increment to 50mm and designing the drawer I did a 10mm back inset so it automatically adjusts with depth change. We are using the dovetails some, on these I can't seem to do a back inset. Is there any other way to trick it?
Rick Palechuk
Wizard Member
Posts: 1896
Joined: Wed, May 18 2005, 7:54PM
Company Name: Milltech Millworks Ltd.
Country: CANADA
Location: Edmonton, Alberta
Contact:

Re: DRAWER BOX DEPTH

Post by Rick Palechuk »

Hey Sheldon, if you add the 10mm inset to the sides, bottom, and back you should be able to get the results that you're after.
Attachments
Std_Dovetail Dbx -slide in btm test.hsf
(402.02 KiB) Downloaded 392 times
test drawers.jpg
Post Reply