Build 12 - countertops crash with back splash
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- Guru Member
- Posts: 322
- Joined: Thu, Nov 29 2007, 5:18PM
- Company Name: Tim Lucas Custom Woodworks LLC
- Country: UNITED STATES
- Location: bell, florida
- Contact:
Build 12 - countertops crash with back splash
I am having a problem when I add or modify a countertop, if I add a back splash it crashes. Just countertop with or without overhang is ok.
Tim Lucas Custom Woodworks LLC
www.TLCW.us
www.TLCW.us
-
- Thermwood Team
- Posts: 1740
- Joined: Tue, May 17 2005, 12:44PM
- Company Name: Thermwood Corporation
- Location: Thermwood Corp: Dale, Indiana
- Contact:
Re: Build 12 - countertops crash with back splash
Tim,
Please reproduce the crash, then go to the event viewer and let us know what it says about the error (especially any listed faulting module name).
Please reproduce the crash, then go to the event viewer and let us know what it says about the error (especially any listed faulting module name).
Regards,
Scott Vaal
-Thermwood/eCabinet Systems-
Dell Precision / Xeon E3-1240 / 8GB RAM /NVIDIA Quadro K2000
Scott Vaal
-Thermwood/eCabinet Systems-
Dell Precision / Xeon E3-1240 / 8GB RAM /NVIDIA Quadro K2000
-
- Guru Member
- Posts: 322
- Joined: Thu, Nov 29 2007, 5:18PM
- Company Name: Tim Lucas Custom Woodworks LLC
- Country: UNITED STATES
- Location: bell, florida
- Contact:
Re: Build 12 - countertops crash with back splash
hopefully you will be able to read it, but if not please let me know
ThanksTim Lucas Custom Woodworks LLC
www.TLCW.us
www.TLCW.us
-
- Thermwood Team
- Posts: 1740
- Joined: Tue, May 17 2005, 12:44PM
- Company Name: Thermwood Corporation
- Location: Thermwood Corp: Dale, Indiana
- Contact:
Re: Build 12 - countertops crash with back splash
Tim,
Thanks, I was able to read it just fine. If you have not done so already, please ensure that you have the newest driver installed for your graphics card.
Does it do this with any job, or just one particular job? Can you create a new room and add a standard base framed or frameless and then add a c-top with a splash? If it crashes, at what point does it crash (when you press reset view in the Construct Countertop dialog, when you select OK, when you return to main...)? A list of concise steps would be helpful.
Thanks, I was able to read it just fine. If you have not done so already, please ensure that you have the newest driver installed for your graphics card.
Does it do this with any job, or just one particular job? Can you create a new room and add a standard base framed or frameless and then add a c-top with a splash? If it crashes, at what point does it crash (when you press reset view in the Construct Countertop dialog, when you select OK, when you return to main...)? A list of concise steps would be helpful.
Regards,
Scott Vaal
-Thermwood/eCabinet Systems-
Dell Precision / Xeon E3-1240 / 8GB RAM /NVIDIA Quadro K2000
Scott Vaal
-Thermwood/eCabinet Systems-
Dell Precision / Xeon E3-1240 / 8GB RAM /NVIDIA Quadro K2000
-
- Guru Member
- Posts: 322
- Joined: Thu, Nov 29 2007, 5:18PM
- Company Name: Tim Lucas Custom Woodworks LLC
- Country: UNITED STATES
- Location: bell, florida
- Contact:
Re: Build 12 - countertops crash with back splash
Hi Scott
I just tried a new room with a standard cabinet, then added the counter top with a little overhang, then the back splash - when i clicked ok it crashed.
I started ecabs another room, base, countertop with overhang - no backsplash - clicked ok and its ok - here is a capture of my countertop screen I checked my driver and it is the newest driver
Strange - i just edited the one without the back splash, when i added the splash - crash when ok clicked
just tried another new one added a left splash - crash on ok
- i had a problem with build 12 nothing would display and had to check double hoops
Hope this helps
Thanks
Tim
I just tried a new room with a standard cabinet, then added the counter top with a little overhang, then the back splash - when i clicked ok it crashed.
I started ecabs another room, base, countertop with overhang - no backsplash - clicked ok and its ok - here is a capture of my countertop screen I checked my driver and it is the newest driver
Strange - i just edited the one without the back splash, when i added the splash - crash when ok clicked
just tried another new one added a left splash - crash on ok
- i had a problem with build 12 nothing would display and had to check double hoops
Hope this helps
Thanks
Tim
Tim Lucas Custom Woodworks LLC
www.TLCW.us
www.TLCW.us
-
- Thermwood Team
- Posts: 1740
- Joined: Tue, May 17 2005, 12:44PM
- Company Name: Thermwood Corporation
- Location: Thermwood Corp: Dale, Indiana
- Contact:
Re: Build 12 - countertops crash with back splash
Tim,
Just letting you know that I sent you a PM.
Just letting you know that I sent you a PM.
Regards,
Scott Vaal
-Thermwood/eCabinet Systems-
Dell Precision / Xeon E3-1240 / 8GB RAM /NVIDIA Quadro K2000
Scott Vaal
-Thermwood/eCabinet Systems-
Dell Precision / Xeon E3-1240 / 8GB RAM /NVIDIA Quadro K2000