Drawer Box Height Relative to Drawer Front Height

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

Nat Wheatley
eCabinets Beta Tester
Posts: 436
Joined: Wed, Apr 15 2009, 8:22PM
Company Name: Plymouth Custom Closets
Country: UNITED STATES
Location: Plympton, MA

Drawer Box Height Relative to Drawer Front Height

Postby Nat Wheatley » Sat, Mar 08 2014, 4:34PM

In the Door/Drawer editor I'm using the option ' Add Drawer Box with Drawer Front' to add my drawer boxes. The drawer boxes need to be 38mm shorter than the drawer fronts. I can set the top and bottom insets to get the correct height drawer box, which works if there's nothing else in the way. When there's a fixed shelf, cabinet top, or cabinet bottom involved, that the drawer fronts laps onto (at the top or bottom), it's shortening the height of the drawer box by more than the values that I've got the insets set to.

Is there a way to do this so that the fixed shelves/cabinet tops/cabinet bottoms don't factor into the top and bottom insets?
http://www.plymouthcustomclosets.com

Dell Precision 490/ Intel Xeon 3.20 Ghz/3 GB RAM/ Nvidia Quadro FX 3450/ Windows XP, sp 3

jason galbraith
Senior Member
Posts: 249
Joined: Wed, Dec 10 2008, 3:29PM
Company Name: Eastcoast Ultimate
Country: AUSTRALIA
Contact:

Re: Drawer Box Height Relative to Drawer Front Height

Postby jason galbraith » Sun, Mar 09 2014, 3:53PM

Not really, you can always set the fixed height of the draw in the Min Height Inc.
Core i7-2600 @ 3.70Ghz - 8 GB ram - Win 7 Ultimate 64bit - 2 x 24" ASUS monitors - Nvidia 600 Quadro 1GB graphics
www.eastcoastultimate.com.au

Nat Wheatley
eCabinets Beta Tester
Posts: 436
Joined: Wed, Apr 15 2009, 8:22PM
Company Name: Plymouth Custom Closets
Country: UNITED STATES
Location: Plympton, MA

Re: Drawer Box Height Relative to Drawer Front Height

Postby Nat Wheatley » Sun, Mar 09 2014, 5:07PM

That'll work, thanks Jason.
http://www.plymouthcustomclosets.com

Dell Precision 490/ Intel Xeon 3.20 Ghz/3 GB RAM/ Nvidia Quadro FX 3450/ Windows XP, sp 3


Return to “eCabinet Systems Software”

Who is online

Users browsing this forum: No registered users and 8 guests