Partition Error

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

Nat Wheatley
eCabinets Beta Tester
Posts: 436
Joined: Wed, Apr 15 2009, 8:22PM
Company Name: Plymouth Custom Closets
Country: UNITED STATES
Location: Plympton, MA

Partition Error

Postby Nat Wheatley » Tue, Mar 25 2014, 4:26PM

I cut the attached cabinet today, and the shelf holes in the partition were about 1mm deep. I'm using the SB Link, set to metric.
Attachments
11.hsf
(1.15 MiB) Downloaded 57 times
http://www.plymouthcustomclosets.com

Dell Precision 490/ Intel Xeon 3.20 Ghz/3 GB RAM/ Nvidia Quadro FX 3450/ Windows XP, sp 3

User avatar
Scott G Vaal
Thermwood Team
Posts: 1741
Joined: Tue, May 17 2005, 12:44PM
Company Name: Thermwood Corporation
Location: Thermwood Corp: Dale, Indiana
Contact:

Re: Partition Error

Postby Scott G Vaal » Tue, Mar 25 2014, 10:49PM

Nat,

Which part are you having trouble with? There is not a partition in the attached cabinet. I looked at all the other parts and they seem to have correct hole depths in the CNC output. If you would, please send us an export from your SB link and I will take a look at it.
Regards,

Scott Vaal
-Thermwood/eCabinet Systems-
Dell Precision / Xeon E3-1240 / 8GB RAM /NVIDIA Quadro K2000

Nat Wheatley
eCabinets Beta Tester
Posts: 436
Joined: Wed, Apr 15 2009, 8:22PM
Company Name: Plymouth Custom Closets
Country: UNITED STATES
Location: Plympton, MA

Re: Partition Error

Postby Nat Wheatley » Wed, Mar 26 2014, 1:03AM

Sorry, this is the correct cabinet. Not clear on how I attached the wrong one last time, but I did.

I'll send an export file from the SB Link in the morning.

Thanks
Attachments
Partition.hsf
(3.09 MiB) Downloaded 55 times
http://www.plymouthcustomclosets.com

Dell Precision 490/ Intel Xeon 3.20 Ghz/3 GB RAM/ Nvidia Quadro FX 3450/ Windows XP, sp 3


Return to “eCabinet Systems Software”

Who is online

Users browsing this forum: No registered users and 3 guests