Toekick Notch

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

Nat Wheatley
eCabinets Beta Tester
Posts: 436
Joined: Wed, Apr 15 2009, 8:22PM
Company Name: Plymouth Custom Closets
Country: UNITED STATES
Location: Plympton, MA

Toekick Notch

Postby Nat Wheatley » Fri, Apr 11 2014, 8:51AM

On the attached cabinet, I'm wondering if there's any way to do the toekick on the attached cabinet (recessed 19mm) without the notches on the sides?

Inside Radius Corner.hsf
(1.69 MiB) Downloaded 97 times
http://www.plymouthcustomclosets.com

Dell Precision 490/ Intel Xeon 3.20 Ghz/3 GB RAM/ Nvidia Quadro FX 3450/ Windows XP, sp 3

User avatar
Kerry Fullington
Wizard Member
Posts: 4566
Joined: Mon, May 09 2005, 7:33PM
Company Name: ProSource of Amarillo
Country: UNITED STATES
Location: Amarillo, TX

Re: Toekick Notch

Postby Kerry Fullington » Fri, Apr 11 2014, 12:29PM

Nat,

Go to Construction Settings toe kick tab and set your toekick height at 1MM
Got to Construction Settings Deck Tab and enter a bottom Deck inset of 127MM
This should do what you want
The router will notch you toe kick 1mm deep but it never gave me any problems
Attachments
Inside Radius Corner KERRY.hsf
(1.72 MiB) Downloaded 66 times

User avatar
Kerry Fullington
Wizard Member
Posts: 4566
Joined: Mon, May 09 2005, 7:33PM
Company Name: ProSource of Amarillo
Country: UNITED STATES
Location: Amarillo, TX

Re: Toekick Notch

Postby Kerry Fullington » Fri, Apr 11 2014, 12:35PM

Nat,

I guess you could set a toe kick height of .1mm and a deck inset of 127.9mm if you want a smaller notch

Nat Wheatley
eCabinets Beta Tester
Posts: 436
Joined: Wed, Apr 15 2009, 8:22PM
Company Name: Plymouth Custom Closets
Country: UNITED STATES
Location: Plympton, MA

Re: Toekick Notch

Postby Nat Wheatley » Fri, Apr 11 2014, 12:41PM

Kerry, that's perfect, thanks a million. I went with 1mm, and that works well. There's 1mm edgeband on the bottom of the sides, and it just keeps this back 19mm from the front edge.

I've always cut these parts manually and pocket screwed them together, along with some other misc backer pieces for field assembly. This is great that I can cut them on the router now and have the RTA fittings as well.

Thanks again for the help.

Nat
http://www.plymouthcustomclosets.com

Dell Precision 490/ Intel Xeon 3.20 Ghz/3 GB RAM/ Nvidia Quadro FX 3450/ Windows XP, sp 3


Return to “eCabinet Systems Software”

Who is online

Users browsing this forum: No registered users and 11 guests