Hello , I am having some difficulty with a job I'm drawing . Everything in ecabs seems to be working correctly except the Line drawing editor, the program shuts off after just a few minutes
of dimensioning or anything for that matter while in the LDE.
I downloaded graphics card driver today, no luck. I have to get these drawings out and don't know what to do next.
Any advice would be greatly appreciated.
My computer specs are: Dell Precision M4800, Intel Core i7-4810MQ processor (Quad Core 2.8Ghz, 3.8Ghz Turbo, 6MB 47W, w/HD Graphics 4600). Windows 7 Pro, and AMD FirePro M5100 w/2GB GDDR5
Thanks in advance for any advice.
Dennis Adrian
LDE problems
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- Junior Member
- Posts: 28
- Joined: Sat, May 21 2005, 10:36AM
- Location: Pensacola, FL
-
- Thermwood Team
- Posts: 857
- Joined: Tue, May 17 2005, 12:47PM
- Company Name: Thermwood
- Country: UNITED STATES
- Location: Thermwood
Re: LDE problems
If you can, reproduce the crash then go to the event viewer and see what dll the crash occurred in. In the meantime, you can go to settings and preferences and check Force software rendering and Use Graphics Double Buffering, then restart ecabinets. You could also try going into the AMD catalyst control panel and setting up a profile for ecabinets.exe and force it to use the Firepro video card. Here is a video that explains a little of what I am talking about.
https://www.youtube.com/watch?v=DCh9Eob0mNY
https://www.youtube.com/watch?v=DCh9Eob0mNY
Rick Deskins
eCabinet Systems Programmer
Dell Precision / Xeon E3-1240 / 8GB RAM/ AMD FirePro V4900
eCabinet Systems Programmer
Dell Precision / Xeon E3-1240 / 8GB RAM/ AMD FirePro V4900
-
- Junior Member
- Posts: 28
- Joined: Sat, May 21 2005, 10:36AM
- Location: Pensacola, FL
Re: LDE problems
Thanks Rick, I'll try that, I think this computer is mocking me because it only does this on occasion and otherwise works just fine!
-
- Junior Member
- Posts: 28
- Joined: Sat, May 21 2005, 10:36AM
- Location: Pensacola, FL
Re: LDE problems
Hey Rick, I did not have any problems w/ the LDE for some time , but it just crashed again. Attached is the dll from the event viewer. Is there any help you can give me from this info?
Thanks, Dennis Adrian
Thanks, Dennis Adrian
- Attachments
-
- event viewer ecab crash.txt
- (672 Bytes) Downloaded 304 times