Searching through the forum I found part of my answer as I should place my part label on the lower left of my part and then when I flip it the label will be on the lower right face down - with my machine set Y-axis =48 and X-axis =96 would I be standing at the Y-axis or X -axis to attach the label on the lower left?
Thanks
Tim
Flip ops
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- Guru Member
- Posts: 322
- Joined: Thu, Nov 29 2007, 5:18PM
- Company Name: Tim Lucas Custom Woodworks LLC
- Country: UNITED STATES
- Location: bell, florida
- Contact:
Flip ops
Tim Lucas Custom Woodworks LLC
www.TLCW.us
www.TLCW.us
-
- eCabinets Beta Tester
- Posts: 491
- Joined: Wed, Apr 15 2009, 8:22PM
- Company Name: Plymouth Custom Closets
- Country: UNITED STATES
- Location: Plympton, MA
Re: Flip ops
Tim,
The help section on Link shows how the sheet is flipped (depends on what settings you've selected). To get to the help section click the blue 'button' over the 'Write to Shopbot' button on the main screen of the Link. I typed 'flip' into the search bar and the first choice is 'Flip Ops First' which explains how the sheet is flipped.
The help section on Link shows how the sheet is flipped (depends on what settings you've selected). To get to the help section click the blue 'button' over the 'Write to Shopbot' button on the main screen of the Link. I typed 'flip' into the search bar and the first choice is 'Flip Ops First' which explains how the sheet is flipped.
http://www.plymouthcustomclosets.com
Dell Precision 490/ Intel Xeon 3.20 Ghz/3 GB RAM/ Nvidia Quadro FX 3450/ Windows XP, sp 3
Dell Precision 490/ Intel Xeon 3.20 Ghz/3 GB RAM/ Nvidia Quadro FX 3450/ Windows XP, sp 3