Curved top of cabinet

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

Post Reply
tim lucas
Guru Member
Posts: 322
Joined: Thu, Nov 29 2007, 5:18PM
Company Name: Tim Lucas Custom Woodworks LLC
Country: UNITED STATES
Location: bell, florida
Contact:

Curved top of cabinet

Post by tim lucas »

Need a little help, Would like to know how you would go about drawing the top of the upper cabinet in this picture.
Mark Thompson bathroom.png
I am currently using a 8" wide top rail and cutting it to match the curved area, but would like to know any other ideas
W2430.jpg
W2430.jpg (13 KiB) Viewed 10796 times
Thanks for any help
Tim
Tim Lucas Custom Woodworks LLC
www.TLCW.us
tim lucas
Guru Member
Posts: 322
Joined: Thu, Nov 29 2007, 5:18PM
Company Name: Tim Lucas Custom Woodworks LLC
Country: UNITED STATES
Location: bell, florida
Contact:

Re: Curved top of cabinet

Post by tim lucas »

Still working on my cabinet, using part editor on a display board, I am having a problem creating a part using closed contour
Capture.PNG
Capture2.PNG
Tim Lucas Custom Woodworks LLC
www.TLCW.us
Scott G Vaal
Thermwood Team
Posts: 1740
Joined: Tue, May 17 2005, 12:44PM
Company Name: Thermwood Corporation
Location: Thermwood Corp: Dale, Indiana
Contact:

Re: Curved top of cabinet

Post by Scott G Vaal »

tim lucas wrote:Still working on my cabinet, using part editor on a display board, I am having a problem creating a part using closed contour
Capture.PNG
Capture2.PNG
Tim,
If you attach the cabinet with your geometry saved in it, I will be glad to investigate.
Regards,

Scott Vaal
-Thermwood/eCabinet Systems-
Dell Precision / Xeon E3-1240 / 8GB RAM /NVIDIA Quadro K2000
tim lucas
Guru Member
Posts: 322
Joined: Thu, Nov 29 2007, 5:18PM
Company Name: Tim Lucas Custom Woodworks LLC
Country: UNITED STATES
Location: bell, florida
Contact:

Re: Curved top of cabinet

Post by tim lucas »

well .... , I went back in to the cabinet and now can't reproduce it, works like it should :D
I must have done something to the board prior that created the error.
Thanks
Tim
Tim Lucas Custom Woodworks LLC
www.TLCW.us
George Davidson
eCabinets Beta Tester
Posts: 1585
Joined: Tue, May 17 2005, 1:16PM
Location: Norwood Pa.

Re: Curved top of cabinet

Post by George Davidson »

Test It should have a Cabinet in a Zip ?? :!:
Attachments
New folder.zip
(4.91 KiB) Downloaded 464 times
George Davidson
eCabinets Beta Tester
Posts: 1585
Joined: Tue, May 17 2005, 1:16PM
Location: Norwood Pa.

Re: Curved top of cabinet

Post by George Davidson »

Here it is
Attachments
Shot1.jpg
George Davidson
eCabinets Beta Tester
Posts: 1585
Joined: Tue, May 17 2005, 1:16PM
Location: Norwood Pa.

Re: Curved top of cabinet

Post by George Davidson »

xx
Attachments
Untitled 6.stl
(220.39 KiB) Downloaded 459 times
1111.jpg
Post Reply