Slide Holes Not Visible

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

User avatar
Vince Lisanti
Senior Member
Posts: 134
Joined: Sat, Jun 11 2005, 7:18AM
Location: Rock Hill, N.Y.
Contact:

Slide Holes Not Visible

Postby Vince Lisanti » Tue, Mar 17 2015, 12:40PM

BRH_24D_1 DRW.jpg
BRH_24D_1 DRW.jpg (16.12 KiB) Viewed 691 times
BRH_24D_1 DRW.hsf
(1.75 MiB) Downloaded 58 times
I cannot get drawer slide holes to be visible in the upper partitions in this cabinet. They show up in the nest so I am assuming they would be cut, but I want to make sure and would also like to know if they are visible for anyone else.

Thanks
Dell Precision M6500
Intel(R) Core(TM) i7 CPU Q 740 @ 1.73GHz (8 CPUs), ~1.7GHz 4.00 GB RAM
NVIDIA Quadro FX 2800M
Windows 7 Professional 64-bit

User avatar
Scott G Vaal
Thermwood Team
Posts: 1741
Joined: Tue, May 17 2005, 12:44PM
Company Name: Thermwood Corporation
Location: Thermwood Corp: Dale, Indiana
Contact:

Re: Slide Holes Not Visible

Postby Scott G Vaal » Tue, Mar 17 2015, 3:32PM

Vince,

Your partitions are positioned past the inside edge of your left and right face frame stiles. This is because the 0.0156" (1/64th) scribe that you have applied plus 2 times the material thickness .75" (3/4") is wider than your FF stiles (overhangs the inside edge by .0156"). Since slide patterns are designed to position from the inside edge of the FF stiles, your scenario is causing the pattern to get buried into the partition. Do you need this small scribe?
Regards,

Scott Vaal
-Thermwood/eCabinet Systems-
Dell Precision / Xeon E3-1240 / 8GB RAM /NVIDIA Quadro K2000

User avatar
Vince Lisanti
Senior Member
Posts: 134
Joined: Sat, Jun 11 2005, 7:18AM
Location: Rock Hill, N.Y.
Contact:

Re: Slide Holes Not Visible

Postby Vince Lisanti » Tue, Mar 17 2015, 3:49PM

Thanks for the quick response Scott. That answers my question. I will do away with the 1/64" scribe on these cabinets.

Thanks again.
Dell Precision M6500
Intel(R) Core(TM) i7 CPU Q 740 @ 1.73GHz (8 CPUs), ~1.7GHz 4.00 GB RAM
NVIDIA Quadro FX 2800M
Windows 7 Professional 64-bit


Return to “eCabinet Systems Software”

Who is online

Users browsing this forum: Bing [Bot] and 7 guests