I have created a dummy wall so I can associate cabinets to it for alignment purposes. I put the cabinets on the BACK side of the wall.
I am using the context menu to adjust the size of the cabinets. I select a cabinet, context to the adjust cabinet features and then change the height (adjust top), and depth (adjust front). After it goes through its gyrations of changing the cabinet size and completes, my cabinets have disappeared. I need to go to Wall View and select front then back to get them to reappear. This is repeatable and happens on each and every cabinet.
This doesn't seem to be right.
Noticed something in new build
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- Guru Member
- Posts: 833
- Joined: Thu, May 14 2009, 11:41PM
- Company Name: Diamond Lake Custom Woodworks
- Location: Newport, WA
- Contact:
Noticed something in new build
Sincerely,
Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com
Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com
-
- Thermwood Team
- Posts: 857
- Joined: Tue, May 17 2005, 12:47PM
- Company Name: Thermwood
- Country: UNITED STATES
- Location: Thermwood
Re: Noticed something in new build
Can you post the job and the steps you take to reproduce this?
Rick Deskins
eCabinet Systems Programmer
Dell Precision / Xeon E3-1240 / 8GB RAM/ AMD FirePro V4900
eCabinet Systems Programmer
Dell Precision / Xeon E3-1240 / 8GB RAM/ AMD FirePro V4900
-
- Guru Member
- Posts: 833
- Joined: Thu, May 14 2009, 11:41PM
- Company Name: Diamond Lake Custom Woodworks
- Location: Newport, WA
- Contact:
Re: Noticed something in new build
Rick, the job is HUGE (about 50MB) and I can't upload it here.
Sincerely,
Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com
Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com
-
- Thermwood Team
- Posts: 1740
- Joined: Tue, May 17 2005, 12:44PM
- Company Name: Thermwood Corporation
- Location: Thermwood Corp: Dale, Indiana
- Contact:
Re: Noticed something in new build
Don,
You can mail it to cabinets@thermwood.com if your email will handle it. Put Attn: Scott V in the subject line if you send it.
You can mail it to cabinets@thermwood.com if your email will handle it. Put Attn: Scott V in the subject line if you send it.
Regards,
Scott Vaal
-Thermwood/eCabinet Systems-
Dell Precision / Xeon E3-1240 / 8GB RAM /NVIDIA Quadro K2000
Scott Vaal
-Thermwood/eCabinet Systems-
Dell Precision / Xeon E3-1240 / 8GB RAM /NVIDIA Quadro K2000
-
- Guru Member
- Posts: 833
- Joined: Thu, May 14 2009, 11:41PM
- Company Name: Diamond Lake Custom Woodworks
- Location: Newport, WA
- Contact:
Re: Noticed something in new build
Should be there in a few minutes.
Sincerely,
Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com
Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com
-
- Thermwood Team
- Posts: 1740
- Joined: Tue, May 17 2005, 12:44PM
- Company Name: Thermwood Corporation
- Location: Thermwood Corp: Dale, Indiana
- Contact:
Re: Noticed something in new build
Don,
Thanks for the job, it allowed me to reproduce what you were seeing. It appears to require the items to be associated to, but not physically touching, and on the back side of the wall. We will get it on the list and get it resolved. However, for now you can simply build your wall with the build direction facing the cabinets (the thick black line at the top of the wall) and all will work as expected. You can also just reverse the build direction by: selecting the wall, Right-Click -> Wall Options -> Reverse Build Direction. Hope this helps.
Thanks for the job, it allowed me to reproduce what you were seeing. It appears to require the items to be associated to, but not physically touching, and on the back side of the wall. We will get it on the list and get it resolved. However, for now you can simply build your wall with the build direction facing the cabinets (the thick black line at the top of the wall) and all will work as expected. You can also just reverse the build direction by: selecting the wall, Right-Click -> Wall Options -> Reverse Build Direction. Hope this helps.
Regards,
Scott Vaal
-Thermwood/eCabinet Systems-
Dell Precision / Xeon E3-1240 / 8GB RAM /NVIDIA Quadro K2000
Scott Vaal
-Thermwood/eCabinet Systems-
Dell Precision / Xeon E3-1240 / 8GB RAM /NVIDIA Quadro K2000
-
- Guru Member
- Posts: 833
- Joined: Thu, May 14 2009, 11:41PM
- Company Name: Diamond Lake Custom Woodworks
- Location: Newport, WA
- Contact:
Re: Noticed something in new build
Thanks Scott. I did the reverse build direction option.
Sincerely,
Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com
Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com