Hi there,
Maybe a silly question, but is there a way to lock a fixed shelf in place, so when resizing the cabinet, it stays in the same fixed position say from the very bottom of the cabinet or the top of the toe kick position.
An example of a cabinet i use is attached, at the moment when i resize the height of the cabinet, the drawer fronts and doors change size accordingly but i would only like the doors to change size, leaving the drawer fronts below the same fixed size.
Tried doing a stretcher as the shelf, but the opening sizes don't relate to it when going to add doors/drawer fronts.
Any help/ideas would be greatly taken on board.
Thanks in advance,
Shaun
Fixed Shelf Locks
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- New Member
- Posts: 15
- Joined: Mon, Dec 08 2014, 11:13PM
- Company Name: Not Just Kitchens LTD
- Country: NEW ZEALAND
-
- Thermwood Team
- Posts: 1740
- Joined: Tue, May 17 2005, 12:44PM
- Company Name: Thermwood Corporation
- Location: Thermwood Corp: Dale, Indiana
- Contact:
Re: Fixed Shelf Locks
Shaun,
Funny you should ask! Please view my post on the new features coming soon. { http://www.thermwood.com/forums/viewtop ... =3&t=14351 }
Funny you should ask! Please view my post on the new features coming soon. { http://www.thermwood.com/forums/viewtop ... =3&t=14351 }
Regards,
Scott Vaal
-Thermwood/eCabinet Systems-
Dell Precision / Xeon E3-1240 / 8GB RAM /NVIDIA Quadro K2000
Scott Vaal
-Thermwood/eCabinet Systems-
Dell Precision / Xeon E3-1240 / 8GB RAM /NVIDIA Quadro K2000
-
- New Member
- Posts: 15
- Joined: Mon, Dec 08 2014, 11:13PM
- Company Name: Not Just Kitchens LTD
- Country: NEW ZEALAND
Re: Fixed Shelf Locks
Thanks Scott!
Can't wait for the next version to be released, any idea on when that might be?
Can't wait for the next version to be released, any idea on when that might be?
-
- Thermwood Team
- Posts: 1740
- Joined: Tue, May 17 2005, 12:44PM
- Company Name: Thermwood Corporation
- Location: Thermwood Corp: Dale, Indiana
- Contact:
Re: Fixed Shelf Locks
Will be in beta soon and the release depends on how well beta goes.Shaun Just wrote:Thanks Scott!
Can't wait for the next version to be released, any idea on when that might be?
Regards,
Scott Vaal
-Thermwood/eCabinet Systems-
Dell Precision / Xeon E3-1240 / 8GB RAM /NVIDIA Quadro K2000
Scott Vaal
-Thermwood/eCabinet Systems-
Dell Precision / Xeon E3-1240 / 8GB RAM /NVIDIA Quadro K2000