Hiding a wall in presentation mode

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

Post Reply
Donald Thomson
Guru Member
Posts: 833
Joined: Thu, May 14 2009, 11:41PM
Company Name: Diamond Lake Custom Woodworks
Location: Newport, WA
Contact:

Hiding a wall in presentation mode

Post by Donald Thomson »

I have done a kitchen layout. There is an island that has base cabinets and upper cabinets hanging from the ceiling above. I used a 1" thick wall to anchor the cabinets to.

Now, I would like to hide that wall when in presentation mode so the client doesn't see it and sees things as they will actually be.

Thanks.
Sincerely,

Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com
Ralph Balanik
Senior Member
Posts: 198
Joined: Fri, Jul 30 2010, 5:33PM
Company Name: Ralph Balanik
Country: CANADA

Re: Hiding a wall in presentation mode

Post by Ralph Balanik »

I think you have to right click on the wall just before you do a presentation view, and then select wall only. Maybe a problem with an island wall that I don't know about or with the hide wall feature. :?:
Scott G Vaal
Thermwood Team
Posts: 1740
Joined: Tue, May 17 2005, 12:44PM
Company Name: Thermwood Corporation
Location: Thermwood Corp: Dale, Indiana
Contact:

Re: Hiding a wall in presentation mode

Post by Scott G Vaal »

Don,

As Ralph mentioned, you can go to Render view, right-click on a wall, then select Hide Wall Only.
Regards,

Scott Vaal
-Thermwood/eCabinet Systems-
Dell Precision / Xeon E3-1240 / 8GB RAM /NVIDIA Quadro K2000
Post Reply