pocket screws
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- New Member
- Posts: 8
- Joined: Tue, Sep 15 2015, 9:43AM
- Company Name: mcmanus development
- Country: UNITED STATES
pocket screws
hey guys, I am in search of the proper way to add pocket screws in ecab to a display panel I have created. any info would me much appreciated thank you
-
- Thermwood Team
- Posts: 1740
- Joined: Tue, May 17 2005, 12:44PM
- Company Name: Thermwood Corporation
- Location: Thermwood Corp: Dale, Indiana
- Contact:
Re: pocket screws
John,
You cannot add pocket screw construction to a display panel. Only cabinet parts will allow a construction method to be added.
Now, with that said, you can take a cabinet and remove all parts but the back and use it as a display panel and get the construction added. I will attach a cabinet that I have applied the pocket screws to all 4 sides of a back for you to uses or review. You can re-size it to whatever dimensions you need and turn off the construction on the joints that you do not wish to have pocket screw applied to. Hope this helps.
You cannot add pocket screw construction to a display panel. Only cabinet parts will allow a construction method to be added.
Now, with that said, you can take a cabinet and remove all parts but the back and use it as a display panel and get the construction added. I will attach a cabinet that I have applied the pocket screws to all 4 sides of a back for you to uses or review. You can re-size it to whatever dimensions you need and turn off the construction on the joints that you do not wish to have pocket screw applied to. Hope this helps.
- Attachments
-
- Pocket Screws On a Back Only.hsf
- (338.02 KiB) Downloaded 419 times
Regards,
Scott Vaal
-Thermwood/eCabinet Systems-
Dell Precision / Xeon E3-1240 / 8GB RAM /NVIDIA Quadro K2000
Scott Vaal
-Thermwood/eCabinet Systems-
Dell Precision / Xeon E3-1240 / 8GB RAM /NVIDIA Quadro K2000
-
- Guru Member
- Posts: 322
- Joined: Thu, Nov 29 2007, 5:18PM
- Company Name: Tim Lucas Custom Woodworks LLC
- Country: UNITED STATES
- Location: bell, florida
- Contact:
Re: pocket screws
Scott,
Can the Shopbot link cut the pockets for the pocket screws?
Can the Shopbot link cut the pockets for the pocket screws?
Tim Lucas Custom Woodworks LLC
www.TLCW.us
www.TLCW.us
-
- Thermwood Team
- Posts: 1740
- Joined: Tue, May 17 2005, 12:44PM
- Company Name: Thermwood Corporation
- Location: Thermwood Corp: Dale, Indiana
- Contact:
Re: pocket screws
Tim,
Sorry, the link does not support pocket screw machining.
Sorry, the link does not support pocket screw machining.
Regards,
Scott Vaal
-Thermwood/eCabinet Systems-
Dell Precision / Xeon E3-1240 / 8GB RAM /NVIDIA Quadro K2000
Scott Vaal
-Thermwood/eCabinet Systems-
Dell Precision / Xeon E3-1240 / 8GB RAM /NVIDIA Quadro K2000
-
- Thermwood Team
- Posts: 1740
- Joined: Tue, May 17 2005, 12:44PM
- Company Name: Thermwood Corporation
- Location: Thermwood Corp: Dale, Indiana
- Contact:
Re: pocket screws
Tim,tim lucas wrote:Thanks Scott, maybe someday
I will certainly add it to the wish list for you.
Regards,
Scott Vaal
-Thermwood/eCabinet Systems-
Dell Precision / Xeon E3-1240 / 8GB RAM /NVIDIA Quadro K2000
Scott Vaal
-Thermwood/eCabinet Systems-
Dell Precision / Xeon E3-1240 / 8GB RAM /NVIDIA Quadro K2000
-
- Guru Member
- Posts: 322
- Joined: Thu, Nov 29 2007, 5:18PM
- Company Name: Tim Lucas Custom Woodworks LLC
- Country: UNITED STATES
- Location: bell, florida
- Contact:
Re: pocket screws
Awesome!Scott G Vaal wrote:Tim,tim lucas wrote:Thanks Scott, maybe someday
I will certainly add it to the wish list for you.
Thanks again
Tim Lucas Custom Woodworks LLC
www.TLCW.us
www.TLCW.us
-
- eCabinets Beta Tester
- Posts: 1232
- Joined: Mon, May 30 2005, 2:26PM
- Location: Anderson SC.
- Contact:
Re: pocket screws
Tim, until then you can make a RTA hole pattern that is just a slot and apply it. It will cut it as a dado.
Forrest
Forrest
-
- Guru Member
- Posts: 322
- Joined: Thu, Nov 29 2007, 5:18PM
- Company Name: Tim Lucas Custom Woodworks LLC
- Country: UNITED STATES
- Location: bell, florida
- Contact:
Re: pocket screws
I will have to give that a tryForrest Chapman wrote:Tim, until then you can make a RTA hole pattern that is just a slot and apply it. It will cut it as a dado.
Forrest
Thanks
Tim
Tim Lucas Custom Woodworks LLC
www.TLCW.us
www.TLCW.us