Hi there,
Is there an easier way to copy a complete closed contour and enlarge or decrease the size for example, I make a 55mm frame and want to do a 47mm profiled edge on the inside, at the moment I create my 55mm edge and do the pocket cut, then I create edges and copy each inside edge by 8mm and then trim them together then do the profile cut, and thought there must be a easier way of doing this in one step? Any ideas?
please see attached photos
Thanks,
Shaun
Copy contour
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- New Member
- Posts: 15
- Joined: Mon, Dec 08 2014, 11:13PM
- Company Name: Not Just Kitchens LTD
- Country: NEW ZEALAND
-
- Guru Member
- Posts: 322
- Joined: Thu, Nov 29 2007, 5:18PM
- Company Name: Tim Lucas Custom Woodworks LLC
- Country: UNITED STATES
- Location: bell, florida
- Contact:
Re: Copy contour
Are you familiar with the offset in part editor ?
Tim Lucas Custom Woodworks LLC
www.TLCW.us
www.TLCW.us
-
- New Member
- Posts: 15
- Joined: Mon, Dec 08 2014, 11:13PM
- Company Name: Not Just Kitchens LTD
- Country: NEW ZEALAND
Re: Copy contour
Hi tim,
Yeah very familiar with it, what I'm saying is it only offsets one line at a time not the whole box as such
Cheers
Yeah very familiar with it, what I'm saying is it only offsets one line at a time not the whole box as such
Cheers
-
- Guru Member
- Posts: 837
- Joined: Sat, Mar 05 2011, 7:29AM
- Company Name: Heritage WoodWorks
- Country: UNITED STATES
- Location: Jacksonville Nc
- Contact:
Re: Copy contour
You can offset the cutter by 8mm to the left or right of the pocket depending on the cut direction.
Yes! Oh Yes! I Think We Are Going to make It!
https://www.youtube.com/user/ecabinetstips
https://www.facebook.com/groups/397563664342467
https://www.youtube.com/user/ecabinetstips
https://www.facebook.com/groups/397563664342467