Pocket hole in shopbot link

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

tim lucas
Guru Member
Posts: 252
Joined: Thu, Nov 29 2007, 5:18PM
Company Name: Tim Lucas Custom Woodworks LLC
Country: UNITED STATES
Location: bell, florida
Contact:

Pocket hole in shopbot link

Postby tim lucas » Wed, Nov 04 2015, 3:05PM

Just cut a cabinet using the Shopbot link and the pocket holes are out of shape
IMG_20151104_145512095.jpg

they should be round holes created in part editor
Thanks
Tim
HP Desktop
i5 2400 @ 3.10 GHz
8.0 G Ram
Win 7 Pro
Nvidia Quadro NVS 290

Blessed is the man who finds wisdom,
the man who gains understanding.

Rick Deskins
Thermwood Team
Posts: 837
Joined: Tue, May 17 2005, 12:47PM
Company Name: Thermwood
Country: UNITED STATES
Location: Thermwood

Re: Pocket hole in shopbot link

Postby Rick Deskins » Wed, Nov 04 2015, 3:14PM

Can you send a shopbot link export to cabinets@thermwood.com?
Rick Deskins
eCabinet Systems Programmer
Dell Precision / Xeon E3-1240 / 8GB RAM/ AMD FirePro V4900

tim lucas
Guru Member
Posts: 252
Joined: Thu, Nov 29 2007, 5:18PM
Company Name: Tim Lucas Custom Woodworks LLC
Country: UNITED STATES
Location: bell, florida
Contact:

Re: Pocket hole in shopbot link

Postby tim lucas » Wed, Nov 04 2015, 5:29PM

Seems to be a problem with pocket holes with the "Pocket Setting" in the link set to "Spiral" unless you set it with the "Outside-In Cut" checked, then it works just right :D

Thanks
Rick
HP Desktop
i5 2400 @ 3.10 GHz
8.0 G Ram
Win 7 Pro
Nvidia Quadro NVS 290

Blessed is the man who finds wisdom,
the man who gains understanding.


Return to “eCabinet Systems Software”

Who is online

Users browsing this forum: Bing [Bot] and 9 guests