Pocket hole in shopbot link

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

Post Reply
tim lucas
Guru Member
Posts: 322
Joined: Thu, Nov 29 2007, 5:18PM
Company Name: Tim Lucas Custom Woodworks LLC
Country: UNITED STATES
Location: bell, florida
Contact:
Contact tim lucas

Pocket hole in shopbot link

Post by tim lucas »

Just cut a cabinet using the Shopbot link and the pocket holes are out of shape
IMG_20151104_145512095.jpg
they should be round holes created in part editor
Thanks
Tim
Tim Lucas Custom Woodworks LLC
www.TLCW.us
Top
Rick Deskins
Thermwood Team
Posts: 857
Joined: Tue, May 17 2005, 12:47PM
Company Name: Thermwood
Country: UNITED STATES
Location: Thermwood

Re: Pocket hole in shopbot link

Post by Rick Deskins »

Can you send a shopbot link export to cabinets@thermwood.com?
Rick Deskins
eCabinet Systems Programmer
Dell Precision / Xeon E3-1240 / 8GB RAM/ AMD FirePro V4900
Top
tim lucas
Guru Member
Posts: 322
Joined: Thu, Nov 29 2007, 5:18PM
Company Name: Tim Lucas Custom Woodworks LLC
Country: UNITED STATES
Location: bell, florida
Contact:
Contact tim lucas

Re: Pocket hole in shopbot link

Post by tim lucas »

Seems to be a problem with pocket holes with the "Pocket Setting" in the link set to "Spiral" unless you set it with the "Outside-In Cut" checked, then it works just right :D

Thanks
Rick
Tim Lucas Custom Woodworks LLC
www.TLCW.us
Top
Post Reply

Return to “eCabinet Systems Software”