Shelf Hole Suggestion

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

Post Reply
Shaun Just
New Member
Posts: 15
Joined: Mon, Dec 08 2014, 11:13PM
Company Name: Not Just Kitchens LTD
Country: NEW ZEALAND

Shelf Hole Suggestion

Post by Shaun Just »

Hi,

Just a small suggestion that would be quite handy, being able to offset the position of the shelf hole ie from the bottom of the shelf, as we use shelf studs that have a 5mm high plastic support from the steel pin so I need to offset the hole by 5mm to make the shelf centre of the cabinet.

I know I can do what I'm wanting to do by offsetting the height of the shelf by 5mm in the shelf editor, but mainly for the looks and me remembering to offset the shelf by 5mm instead of centering it of the cabinet, or another way I have been doing is by making it a fixed shelf and making a KD/RTA pattern that has the offset.
Wanting to offset the shelf hole 5mm lower than the shelf
Wanting to offset the shelf hole 5mm lower than the shelf
What I do currently with a KD/RTA pattern and by making it a fixed shelf
What I do currently with a KD/RTA pattern and by making it a fixed shelf
Post Reply