sloped ceiling with coffures and soffits

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

Post Reply
Teddy R Allen
New Member
Posts: 2
Joined: Sun, Nov 08 2015, 7:13PM
Company Name: Allen Construction
Country: UNITED STATES

sloped ceiling with coffures and soffits

Post by Teddy R Allen »

Hello E-cab experts...been a long time since I've been on here.
My question is....can I create a sloped ceiling with trays, coffures and beams in Ecabs and what tools in the software used to create the ceiling coffures. Thanks for any help with this.
Ted
Kerry Fullington
Wizard Member
Posts: 4718
Joined: Mon, May 09 2005, 7:33PM
Company Name: Double E Cabinets
Country: UNITED STATES
Location: Amarillo, TX

Re: sloped ceiling with coffures and soffits

Post by Kerry Fullington »

This coffered ceiling is just a single cabinet made from a material 4" Beams. You can put a back in if you want a wood look above the beams but it makes lighting the room harder.
ceiling.jpg
This is an old design of mine using this technique.
Office_01.jpg
Office_01.jpg (93.71 KiB) Viewed 9143 times
George Davidson
eCabinets Beta Tester
Posts: 1585
Joined: Tue, May 17 2005, 1:16PM
Location: Norwood Pa.

Re: sloped ceiling with coffures and soffits

Post by George Davidson »

HI Kerry very "NICE"

The good old DAYS I started out with a 1966 supper van was 10 years old I wanted to get all the bugs out of it.
Here is what my sons have today!!!!
Attachments
100.JPG
Teddy R Allen
New Member
Posts: 2
Joined: Sun, Nov 08 2015, 7:13PM
Company Name: Allen Construction
Country: UNITED STATES

Re: sloped ceiling with coffures and soffits

Post by Teddy R Allen »

Hi Kerry, thanks for the reply...This ceiling is in a church...48x88 with the slopes on the long side. there is a section on both sides of the peak about 20ft by 48 with some recessed trays up in the ceiling. It is all drywall and the walls of these trays are vertical or plumb. Can I build an assembly this large in the software?
Post Reply