Nesting issue - Need help figuring this out

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

Donald Thomson
Guru Member
Posts: 670
Joined: Thu, May 14 2009, 11:41PM
Company Name: Diamond Lake Custom Woodworks
Location: Newport, WA
Contact:

Nesting issue - Need help figuring this out

Postby Donald Thomson » Mon, Jun 27 2016, 5:32PM

I've got a situation where eCabs is rotated parts that are not checked that they can be rotated. I've attached a couple of pictures.

The first picture shows what happens when I perform a nest on a Custom Layout of cabinets. The second picture shows when I take that cabinet into CE and perform a nest. In the first picture, the cabinet side is rotated to go cross grain on the plywood. In the second it is laid properly on the sheet going with the grain.

Part #1 on the first picture is the same Part #4 on the second picture from the same cabinet.

I've never seen this before.
Attachments
Untitled 1A.jpg
Nesting from CE
Untitled 1.jpg
Nesting from Room Layout
Sincerely,

Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com

Rick Deskins
Thermwood Team
Posts: 828
Joined: Tue, May 17 2005, 12:47PM
Company Name: Thermwood
Country: UNITED STATES
Location: Thermwood

Re: Nesting issue - Need help figuring this out

Postby Rick Deskins » Mon, Jun 27 2016, 7:23PM

What is the grain setting for that material in your materials database? Can you post the job file as well as the cabinet file?
Rick Deskins
eCabinet Systems Programmer
Dell Precision / Xeon E3-1240 / 8GB RAM/ AMD FirePro V4900

Donald Thomson
Guru Member
Posts: 670
Joined: Thu, May 14 2009, 11:41PM
Company Name: Diamond Lake Custom Woodworks
Location: Newport, WA
Contact:

Re: Nesting issue - Need help figuring this out

Postby Donald Thomson » Mon, Jun 27 2016, 7:58PM

Job file is 34MB. Want me to email it?
Sincerely,

Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com

Rick Deskins
Thermwood Team
Posts: 828
Joined: Tue, May 17 2005, 12:47PM
Company Name: Thermwood
Country: UNITED STATES
Location: Thermwood

Re: Nesting issue - Need help figuring this out

Postby Rick Deskins » Tue, Jun 28 2016, 9:56AM

You can email it to cabinets@thermwood.com
Rick Deskins
eCabinet Systems Programmer
Dell Precision / Xeon E3-1240 / 8GB RAM/ AMD FirePro V4900


Return to “eCabinet Systems Software”

Who is online

Users browsing this forum: No registered users and 5 guests