Found a small issue with the Link 1.0.21 Beta 2
Needed to make 2 drawer boxes (no cabinets just boxes) in custom layout created a wall - selected my drawer box - CNC created my TWD file - opened the link - loaded the TWD file, all looks fine, click ok - select X or Y nest and get error nothing to nest - click load and nothing is there - something about just drawer boxes causes it to not nest. I added a cabinet to the room and created a new TWD file with the cabinet and all is well even after I load the file and "X" the cabinet from the nest, the drawer boxes nest fine but without the cabinet in the mix the drawer boxes wont nest. Hope you can duplicate
Thanks
Tim
Shopbot Link
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- Guru Member
- Posts: 322
- Joined: Thu, Nov 29 2007, 5:18PM
- Company Name: Tim Lucas Custom Woodworks LLC
- Country: UNITED STATES
- Location: bell, florida
- Contact:
Shopbot Link
Tim Lucas Custom Woodworks LLC
www.TLCW.us
www.TLCW.us
-
- eCabinets Beta Tester
- Posts: 1237
- Joined: Mon, May 30 2005, 2:26PM
- Location: Anderson SC.
- Contact:
Re: Shopbot Link
I don't know how to fix your problem Tim, but I'm wondering why you don't use the batch cabinet function to load your individual drawers?
Forrest
Forrest
-
- Thermwood Team
- Posts: 702
- Joined: Fri, May 15 2015, 1:21PM
- Company Name: Thermwood Corp
- Country: UNITED STATES
Re: Shopbot Link
Tim,
I'm reproducing what you see so I'll get it listed so we can correct it. Doing as Forrest suggests by using Batch Cabinets will allow it to write to nest correctly.
-Clint-
I'm reproducing what you see so I'll get it listed so we can correct it. Doing as Forrest suggests by using Batch Cabinets will allow it to write to nest correctly.
-Clint-
-
- Thermwood Team
- Posts: 702
- Joined: Fri, May 15 2015, 1:21PM
- Company Name: Thermwood Corp
- Country: UNITED STATES
Re: Shopbot Link
And for clarity for others, the issue is in the latest Beta 1.21.2. For me it is functioning within 1.0.21 and 1.0.20.
-Clint-
-Clint-
-
- Guru Member
- Posts: 322
- Joined: Thu, Nov 29 2007, 5:18PM
- Company Name: Tim Lucas Custom Woodworks LLC
- Country: UNITED STATES
- Location: bell, florida
- Contact:
Re: Shopbot Link
Forrest Chapman wrote:I don't know how to fix your problem Tim, but I'm wondering why you don't use the batch cabinet function to load your individual drawers?
Forrest
Well...
I have not used batch function yet, I always just put my stuff in a room with one wall
and on jobs like this I save the drawer box but not the job, so I guess I is a little backward
Thanks
Tim
Tim Lucas Custom Woodworks LLC
www.TLCW.us
www.TLCW.us