On the current job I am doing, I've noticed that when I cut parts for cabinets, some of the stretchers are not getting tenons cut and no mortises are being cut in the cabinets sides.
I will bring a cabinet into stretcher editor, add and adjust stretchers and go back to CE. I will save the cabinet and go back to the room editor. Somewhere, and I don't know where it is happening, mortise and tenon joinery for one or two stretchers in a room of cabinets just disappears and stretchers with butt joints get cut. This happened to 3 stretchers in the current cabinet job.
I can't pinpoint when or where its happening, but it IS happening. Albeit, randomly. Maybe someone can give me some guidance on how to troubleshoot or narrow down this issue. Stretcher editor, cabinet editor, transition back to room editor when saving changes? I just don't know. But it is a surprise to get butt joints when parts are cut when you specified mortise and tenon joints when initially adding the stretchers.
Thanks.
I think there are still some issues in the stretcher editor
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- Guru Member
- Posts: 833
- Joined: Thu, May 14 2009, 11:41PM
- Company Name: Diamond Lake Custom Woodworks
- Location: Newport, WA
- Contact:
I think there are still some issues in the stretcher editor
Sincerely,
Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com
Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com
-
- Thermwood Team
- Posts: 857
- Joined: Tue, May 17 2005, 12:47PM
- Company Name: Thermwood
- Country: UNITED STATES
- Location: Thermwood
Re: I think there are still some issues in the stretcher editor
Can you post the cabinet you are having trouble with?
Rick Deskins
eCabinet Systems Programmer
Dell Precision / Xeon E3-1240 / 8GB RAM/ AMD FirePro V4900
eCabinet Systems Programmer
Dell Precision / Xeon E3-1240 / 8GB RAM/ AMD FirePro V4900