can't get gap between doors when stacking vertically
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- Guru Member
- Posts: 293
- Joined: Fri, Jul 27 2012, 12:30PM
- Company Name: true form cabinets
- Country: CANADA
- Contact:
can't get gap between doors when stacking vertically
if I have a pantry with fixed shelves and doors covering them I can get the doors to have a 2mm spacing between them vertically the doors ignore the edgetape and overlap no matter what I do.
Intel(R) Core(TM) i5-6400 @ 2.70GHz 8.00 GB RAM
NVIDIA GeForce GTX 950
Windows 10 Professional 64-bit
http://www.trueform.ca
CS43 cnc
NVIDIA GeForce GTX 950
Windows 10 Professional 64-bit
http://www.trueform.ca
CS43 cnc
-
- Senior Member
- Posts: 198
- Joined: Fri, Jul 30 2010, 5:33PM
- Company Name: Ralph Balanik
- Country: CANADA
Re: can't get gap between doors when stacking vertically
can you upload the cabinet?
-
- Senior Member
- Posts: 160
- Joined: Fri, Apr 10 2015, 7:57AM
- Company Name: Bergman Custom Casework LLC
- Country: UNITED STATES
Re: can't get gap between doors when stacking vertically
Try putting your doors on before you set the fixed shelves. So long as you know what the height is you can tell it how big you want your doors. I haven't been able to do it successfully the other way round.
_____________
Win 10 Pro 64 bit on MSI Z390M Pro4
Intel core i7 9700KF 3.6GHz (OC 4.2Ghz)
32 gig RAM, NVIDIA GeForce GTX 1050 Ti
NVME SSM2HD 1TB NTFS
Win 10 Pro 64 bit on MSI Z390M Pro4
Intel core i7 9700KF 3.6GHz (OC 4.2Ghz)
32 gig RAM, NVIDIA GeForce GTX 1050 Ti
NVME SSM2HD 1TB NTFS
-
- Guru Member
- Posts: 293
- Joined: Fri, Jul 27 2012, 12:30PM
- Company Name: true form cabinets
- Country: CANADA
- Contact:
Re: can't get gap between doors when stacking vertically
okay thanks ill try doing it that way, I thought my only option was going to be placing them as drawers and then manually adding hinge plate holes
Intel(R) Core(TM) i5-6400 @ 2.70GHz 8.00 GB RAM
NVIDIA GeForce GTX 950
Windows 10 Professional 64-bit
http://www.trueform.ca
CS43 cnc
NVIDIA GeForce GTX 950
Windows 10 Professional 64-bit
http://www.trueform.ca
CS43 cnc
-
- Guru Member
- Posts: 293
- Joined: Fri, Jul 27 2012, 12:30PM
- Company Name: true form cabinets
- Country: CANADA
- Contact:
Re: can't get gap between doors when stacking vertically
here is the cabinet if you want to try, I was aiming on using 440mm doors with 2mm spaces between
- Attachments
-
- food pantry.hsf
- (1.13 MiB) Downloaded 375 times
Intel(R) Core(TM) i5-6400 @ 2.70GHz 8.00 GB RAM
NVIDIA GeForce GTX 950
Windows 10 Professional 64-bit
http://www.trueform.ca
CS43 cnc
NVIDIA GeForce GTX 950
Windows 10 Professional 64-bit
http://www.trueform.ca
CS43 cnc
-
- Senior Member
- Posts: 198
- Joined: Fri, Jul 30 2010, 5:33PM
- Company Name: Ralph Balanik
- Country: CANADA
Re: can't get gap between doors when stacking vertically
I loaded the cabinet in the "develop cabinets and assemblies, erased your doors and without changing any settings, I added a left hinge door. I started at the top and worked my way down. I had no problems and have attached the cabinet as food pantry 2. I suspect that perhaps windows ten might be an issue. the computer that I used is an old Dell with 4 gigs of ram running windows seven. I normally use a windows 8 computer but thisis the computer that was not in use at the time.
-
- Guru Member
- Posts: 293
- Joined: Fri, Jul 27 2012, 12:30PM
- Company Name: true form cabinets
- Country: CANADA
- Contact:
Re: can't get gap between doors when stacking vertically
I loaded your cabinet only issue is the doors are difference sizes with the top and bottom being bigger then the middle two. thanks for trying though I'm going to just add the doors first then add the fixed shelves afterwards as it gives me the most control over door size and placement.
Intel(R) Core(TM) i5-6400 @ 2.70GHz 8.00 GB RAM
NVIDIA GeForce GTX 950
Windows 10 Professional 64-bit
http://www.trueform.ca
CS43 cnc
NVIDIA GeForce GTX 950
Windows 10 Professional 64-bit
http://www.trueform.ca
CS43 cnc