Go to cabinet editor, load Std. Base Frameless
Go to stretcher editor
Click on the top and deck to highlight
Click Add Stretcher
Don't change anything in the settings, just click OK
Click on the newly created stretcher, then click Adjust Stretcher
Click Advanced
Click Inset 4, and change to Top. (It should default to the Front side)
Click OK
The stretcher flies away from the cabinet.
Now, any changes to any of the inset values causes unpredictable movement and sizing of the stretcher.
Stretcher bug
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- eCabinets Beta Tester
- Posts: 1119
- Joined: Tue, May 10 2005, 9:36PM
- Company Name: Corlane Custom Cabinetry LLC
- Country: UNITED STATES
- Location: Carnesville, GA
- Contact:
Stretcher bug
http://www.corlanecabinetry.com
Intel Core i7-5820 3.3GHz, 16GB RAM, NVidia Quadro K2200 4GB, Windows 8.1 Pro 64 bit
CS-41 4x8
CS-45 5x12
Intel Core i7-5820 3.3GHz, 16GB RAM, NVidia Quadro K2200 4GB, Windows 8.1 Pro 64 bit
CS-41 4x8
CS-45 5x12
-
- Thermwood Team
- Posts: 701
- Joined: Fri, May 15 2015, 1:21PM
- Company Name: Thermwood Corp
- Country: UNITED STATES
Re: Stretcher bug
Well that's interesting. We will get it listed for correction for the next version. Thank you.
-Clint-
-Clint-
-
- Guru Member
- Posts: 833
- Joined: Thu, May 14 2009, 11:41PM
- Company Name: Diamond Lake Custom Woodworks
- Location: Newport, WA
- Contact:
Re: Stretcher bug
I have noted things in stretcher editor but haven't been able to reproduce them on a reliable basis.
Go into stretcher editor
Edit/adjust a stretcher
Go back to CE
I've found on some occasions that the stretchers are now butt ends instead of M&T ends. This has happened to me on several occasions. Imagine my surprise when I cut on the CNC some stretchers don't have tenons. Like I said, I've not been able to reproduce this on a reliable basis. Just kinda random. I know, as a former software developer for 18 years, that these bugs are almost impossible to track down.
Go into stretcher editor
Edit/adjust a stretcher
Go back to CE
I've found on some occasions that the stretchers are now butt ends instead of M&T ends. This has happened to me on several occasions. Imagine my surprise when I cut on the CNC some stretchers don't have tenons. Like I said, I've not been able to reproduce this on a reliable basis. Just kinda random. I know, as a former software developer for 18 years, that these bugs are almost impossible to track down.
Sincerely,
Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com
Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com
-
- eCabinets Beta Tester
- Posts: 1119
- Joined: Tue, May 10 2005, 9:36PM
- Company Name: Corlane Custom Cabinetry LLC
- Country: UNITED STATES
- Location: Carnesville, GA
- Contact:
Re: Stretcher bug
We have been having the same issues - dados changing position, disappearing altogether, etc. when going from eCabs to the CNC. We decided to try to get to the bottom of it, and I'm thinking (hoping) that this stretcher bug may be the root of a lot of our woes.
http://www.corlanecabinetry.com
Intel Core i7-5820 3.3GHz, 16GB RAM, NVidia Quadro K2200 4GB, Windows 8.1 Pro 64 bit
CS-41 4x8
CS-45 5x12
Intel Core i7-5820 3.3GHz, 16GB RAM, NVidia Quadro K2200 4GB, Windows 8.1 Pro 64 bit
CS-41 4x8
CS-45 5x12
-
- Junior Member
- Posts: 85
- Joined: Thu, Mar 03 2011, 10:40PM
- Company Name: Silverpine Cabinets
- Country: CANADA
Re: Stretcher bug
I have noticed if I angle them, if there is one dimension locked it causes problems.
David Giesbrecht
Inter(R) Core(TM) i7-7700CPU OC@ 4.8 GHz
8.00 GB DDR5 2133MHz
NVIDIA GeForce GTX 970 4GB
Z270x-Gaming 5 MOBO
1TB Samsung 960PRO SSD
Inter(R) Core(TM) i7-7700CPU OC@ 4.8 GHz
8.00 GB DDR5 2133MHz
NVIDIA GeForce GTX 970 4GB
Z270x-Gaming 5 MOBO
1TB Samsung 960PRO SSD