Corner door sizes

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

Rachel Meehan
New Member
Posts: 4
Joined: Tue, Aug 23 2016, 12:26AM
Company Name: Maif kitchens and shopfitting
Country: AUSTRALIA

Corner door sizes

Postby Rachel Meehan » Sun, Oct 22 2017, 6:06PM

Hi,
Wondering if anyone else is finding this problem.
We are using 6.2.2

We are making a 3 door corner cabinet and having issues with the doors.
In the door editor, I get the doors to the size I want for cutting (by using reveals) which is 290mm on the LH single door, and 295mm each for the RH double door.
Once they are correct in door editor, I return to the main screen, check the door sizes, and they have all increased by 2mm.
DFC LH problem.hsf
(452.02 KiB) Downloaded 24 times


Thanks,
Rachel

Forrest Chapman
eCabinets Beta Tester
Posts: 1127
Joined: Mon, May 30 2005, 2:26PM
Location: Anderson SC.
Contact:

Re: Corner door sizes

Postby Forrest Chapman » Mon, Oct 23 2017, 10:38AM

Rachel, I assume you're in beta? Moderators might wanna move this to the beta forum so you can get help. Only beta users can open the file so I'll take a look while I'm here to see if I can figure out whats going on.

Forrest

Forrest Chapman
eCabinets Beta Tester
Posts: 1127
Joined: Mon, May 30 2005, 2:26PM
Location: Anderson SC.
Contact:

Re: Corner door sizes

Postby Forrest Chapman » Tue, Oct 24 2017, 10:28AM

Rachel, according to your reveal and gap settings the doors are coming out correctly. 292mm on the left door and 2- 296.5mm doors on the right side.

Here is the math for the left hand door. Left Front cabinet dim is 315mm - 3mm left reveal= 312mm- 18mm right door thickness= 294mm- 2mm for the door to door gap= 292mm.

The math works out the same for the right hand pair as I get 296.5mm.

Hope that helps, Forrest


Return to “eCabinet Systems Software”

Who is online

Users browsing this forum: No registered users and 7 guests