Edge Pull placement

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

Post Reply
Forrest Chapman
eCabinets Beta Tester
Posts: 1230
Joined: Mon, May 30 2005, 2:26PM
Location: Anderson SC.
Contact:

Edge Pull placement

Post by Forrest Chapman »

Does anyone have an edge pull similar to Hafele HF12402310 that will place on the door properly? The supplied one sits on the surface instead of behind the edge.

Forrest
Jeremy Schiffer
eCabinets Beta Tester
Posts: 1119
Joined: Tue, May 10 2005, 9:36PM
Company Name: Corlane Custom Cabinetry LLC
Country: UNITED STATES
Location: Carnesville, GA
Contact:

Re: Edge Pull placement

Post by Jeremy Schiffer »

We just did a job with those identical pulls. Didn't use a hole pattern though. I'm not sure if you could, because they need to be on the back of the door. Unless you're looking just for a graphical representation. Corey made one, it looked good on the presentation view.
http://www.corlanecabinetry.com

Intel Core i7-5820 3.3GHz, 16GB RAM, NVidia Quadro K2200 4GB, Windows 8.1 Pro 64 bit
CS-41 4x8
CS-45 5x12
Forrest Chapman
eCabinets Beta Tester
Posts: 1230
Joined: Mon, May 30 2005, 2:26PM
Location: Anderson SC.
Contact:

Re: Edge Pull placement

Post by Forrest Chapman »

I was able to add some manually by way of Hardware Objects. Not the ideal way but with some extra work it got the job done.

Thanks, Forrest
Post Reply