Can't open current file after upgrade to 6.2.1
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- Guru Member
- Posts: 640
- Joined: Tue, Jan 16 2007, 7:56PM
- Company Name: LRG WoodCrafting
- Location: Windsor Locks, CT
- Contact:
Can't open current file after upgrade to 6.2.1
The job file I've been using for my current job won't load after I put the 6.2.1 upgrade on my computer.
All was fine before using 6.2, not it gives two errors while loading.
An error occurred while transferring Parasolid information
Then I press OK to get past the error message and another comes up
There was an error after opening the JOB file
Now what do I do. I guess I'm screwed. How can I downgrade back to 6.2. I tried and it refused to allow the downgrade. I tried the repair option but got the same result with the same two errors.
All was fine before using 6.2, not it gives two errors while loading.
An error occurred while transferring Parasolid information
Then I press OK to get past the error message and another comes up
There was an error after opening the JOB file
Now what do I do. I guess I'm screwed. How can I downgrade back to 6.2. I tried and it refused to allow the downgrade. I tried the repair option but got the same result with the same two errors.
Dell Precision 7710
Intel Core i7-6820HQ @ 2.70GHz 16.00 GB RAM
NVIDIA Quadro M3000M
512 GB PCIe NVMe - M.2 SSD
Win 7 Pro 64-bit
http://lrgwood.com
Intel Core i7-6820HQ @ 2.70GHz 16.00 GB RAM
NVIDIA Quadro M3000M
512 GB PCIe NVMe - M.2 SSD
Win 7 Pro 64-bit
http://lrgwood.com
-
- Thermwood Team
- Posts: 698
- Joined: Fri, May 15 2015, 1:21PM
- Company Name: Thermwood Corp
- Country: UNITED STATES
-
- Guru Member
- Posts: 640
- Joined: Tue, Jan 16 2007, 7:56PM
- Company Name: LRG WoodCrafting
- Location: Windsor Locks, CT
- Contact:
Re: Can't open current file after upgrade to 6.2.1
OK Clint,
Here's the file that won't open in 6.2.1 but did open in 6.2
I'm not having problems with any other file opening in the new version other than this one. I had just been using the file just before the upgrade and when I shut things down I didn't do another save so it should have been fine. I downloaded the new version and opened and verified and I made sure that the previous version was not running. Not my first rodeo here. Thanks for looking.
Here's the file that won't open in 6.2.1 but did open in 6.2
I'm not having problems with any other file opening in the new version other than this one. I had just been using the file just before the upgrade and when I shut things down I didn't do another save so it should have been fine. I downloaded the new version and opened and verified and I made sure that the previous version was not running. Not my first rodeo here. Thanks for looking.
- Attachments
-
- Jean and Rick combined nest.esj
- file won't open in 6.2.1 but did open in 6.2
- (12.09 MiB) Downloaded 420 times
Dell Precision 7710
Intel Core i7-6820HQ @ 2.70GHz 16.00 GB RAM
NVIDIA Quadro M3000M
512 GB PCIe NVMe - M.2 SSD
Win 7 Pro 64-bit
http://lrgwood.com
Intel Core i7-6820HQ @ 2.70GHz 16.00 GB RAM
NVIDIA Quadro M3000M
512 GB PCIe NVMe - M.2 SSD
Win 7 Pro 64-bit
http://lrgwood.com
-
- Guru Member
- Posts: 640
- Joined: Tue, Jan 16 2007, 7:56PM
- Company Name: LRG WoodCrafting
- Location: Windsor Locks, CT
- Contact:
Re: Can't open current file after upgrade to 6.2.1
I'm guessing the file is toast?
Dell Precision 7710
Intel Core i7-6820HQ @ 2.70GHz 16.00 GB RAM
NVIDIA Quadro M3000M
512 GB PCIe NVMe - M.2 SSD
Win 7 Pro 64-bit
http://lrgwood.com
Intel Core i7-6820HQ @ 2.70GHz 16.00 GB RAM
NVIDIA Quadro M3000M
512 GB PCIe NVMe - M.2 SSD
Win 7 Pro 64-bit
http://lrgwood.com
-
- Junior Member
- Posts: 85
- Joined: Thu, Mar 03 2011, 10:40PM
- Company Name: Silverpine Cabinets
- Country: CANADA
Re: Can't open current file after upgrade to 6.2.1
Doesn't work for me either...
David Giesbrecht
Inter(R) Core(TM) i7-7700CPU OC@ 4.8 GHz
8.00 GB DDR5 2133MHz
NVIDIA GeForce GTX 970 4GB
Z270x-Gaming 5 MOBO
1TB Samsung 960PRO SSD
Inter(R) Core(TM) i7-7700CPU OC@ 4.8 GHz
8.00 GB DDR5 2133MHz
NVIDIA GeForce GTX 970 4GB
Z270x-Gaming 5 MOBO
1TB Samsung 960PRO SSD
-
- Guru Member
- Posts: 640
- Joined: Tue, Jan 16 2007, 7:56PM
- Company Name: LRG WoodCrafting
- Location: Windsor Locks, CT
- Contact:
Re: Can't open current file after upgrade to 6.2.1
Thanks for trying. Are you on the newest version or on 6.2?
Dell Precision 7710
Intel Core i7-6820HQ @ 2.70GHz 16.00 GB RAM
NVIDIA Quadro M3000M
512 GB PCIe NVMe - M.2 SSD
Win 7 Pro 64-bit
http://lrgwood.com
Intel Core i7-6820HQ @ 2.70GHz 16.00 GB RAM
NVIDIA Quadro M3000M
512 GB PCIe NVMe - M.2 SSD
Win 7 Pro 64-bit
http://lrgwood.com
-
- Thermwood Team
- Posts: 698
- Joined: Fri, May 15 2015, 1:21PM
- Company Name: Thermwood Corp
- Country: UNITED STATES
Re: Can't open current file after upgrade to 6.2.1
Sorry for getting back to you so late. We can't open it as well, or dig in to get anything out of it. Do you save your jobs to a network location, a cloud service such as DropBox or Google Drive, or do you save locally to the computer?
-Clint-
-Clint-
-
- Guru Member
- Posts: 640
- Joined: Tue, Jan 16 2007, 7:56PM
- Company Name: LRG WoodCrafting
- Location: Windsor Locks, CT
- Contact:
Re: Can't open current file after upgrade to 6.2.1
Everything is saved local. I've learned over the years to save save save in case there's a crash. And with this one I had been saving it every time I made a change. As far as I know, it was working before I upgraded. After that nada.
But it's all good now, I've made it through both jobs that were nested and didn't need to get into it again anyway.
I guess I have to go back to my normal of NEVER UPGRADE IN THE MIDDLE OF A JOB. Because that has served me well.
Just hope they don't ask for extra shelves because they'll have to measure them to let me know what size they are
But it's all good now, I've made it through both jobs that were nested and didn't need to get into it again anyway.
I guess I have to go back to my normal of NEVER UPGRADE IN THE MIDDLE OF A JOB. Because that has served me well.
Just hope they don't ask for extra shelves because they'll have to measure them to let me know what size they are
Dell Precision 7710
Intel Core i7-6820HQ @ 2.70GHz 16.00 GB RAM
NVIDIA Quadro M3000M
512 GB PCIe NVMe - M.2 SSD
Win 7 Pro 64-bit
http://lrgwood.com
Intel Core i7-6820HQ @ 2.70GHz 16.00 GB RAM
NVIDIA Quadro M3000M
512 GB PCIe NVMe - M.2 SSD
Win 7 Pro 64-bit
http://lrgwood.com
-
- Thermwood Team
- Posts: 698
- Joined: Fri, May 15 2015, 1:21PM
- Company Name: Thermwood Corp
- Country: UNITED STATES
Re: Can't open current file after upgrade to 6.2.1
For whatever reason the information didn't all get packaged in the save. It most likely wasn't because of the update of eCabinets. More likely it is that something got in the way of the save is it was all being put together and it was never saved with it. I say likely because I don't know everything, so anything could happen.
Going along with the save save save (which is great practice), I preach the save many, save often. Have multiple copies and save often. Every time I make a design change that differs from current (rearrange cabinets, change material, change color, etc.), I save as a new job or new cabinet. Then I always have something to fall back on. I tend to have back ups of my back ups' back ups. When I finish a project (if I ever do ), all the files get dumped into a folder and zipped up to minimize storage space.
-Clint-
Going along with the save save save (which is great practice), I preach the save many, save often. Have multiple copies and save often. Every time I make a design change that differs from current (rearrange cabinets, change material, change color, etc.), I save as a new job or new cabinet. Then I always have something to fall back on. I tend to have back ups of my back ups' back ups. When I finish a project (if I ever do ), all the files get dumped into a folder and zipped up to minimize storage space.
-Clint-
-
- Junior Member
- Posts: 85
- Joined: Thu, Mar 03 2011, 10:40PM
- Company Name: Silverpine Cabinets
- Country: CANADA
Re: Can't open current file after upgrade to 6.2.1
It was still on 6.2Thanks for trying. Are you on the newest version or on 6.2?
David Giesbrecht
Inter(R) Core(TM) i7-7700CPU OC@ 4.8 GHz
8.00 GB DDR5 2133MHz
NVIDIA GeForce GTX 970 4GB
Z270x-Gaming 5 MOBO
1TB Samsung 960PRO SSD
Inter(R) Core(TM) i7-7700CPU OC@ 4.8 GHz
8.00 GB DDR5 2133MHz
NVIDIA GeForce GTX 970 4GB
Z270x-Gaming 5 MOBO
1TB Samsung 960PRO SSD