Line drawing printing issue

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

Post Reply
Tom Nienow
Junior Member
Posts: 77
Joined: Mon, Jan 11 2010, 11:49PM
Company Name: Nienow Woodwork
Location: Pewaukee, WI

Line drawing printing issue

Post by Tom Nienow »

Lately when printing from the line drawing editor the print itself only shows the dimensions but no endpoints or lines to the endpoints to show what the dimension is in reference to. Updated drivers for my graphics card and the printer to no avail. I can save the drawing as a pdf, print it and all the endpoints and lines/arrows print but that's a few more steps than I'd like to have to make. Any thoughts?
Brian Widiker
New Member
Posts: 23
Joined: Fri, Dec 14 2007, 10:36PM
Location: Cameron WI

Re: Line drawing printing issue

Post by Brian Widiker »

I've been having the same issue. Have tried everything - drivers, settings, uninstalling/reinstalling- even tried with different computer.
tim lucas
Guru Member
Posts: 322
Joined: Thu, Nov 29 2007, 5:18PM
Company Name: Tim Lucas Custom Woodworks LLC
Country: UNITED STATES
Location: bell, florida
Contact:

Re: Line drawing printing issue

Post by tim lucas »

LDE has some issues, sometimes I can JPG a drawing and everything is there then next time it wont be. If I restart eCabs it usually works right. I also noticed that if a cabinet or countertop is not assocaited to a wall it wont show in LDE.
Tim Lucas Custom Woodworks LLC
www.TLCW.us
Post Reply