(New to the drawing part of the program...)
I draw a wall, switch to Elevation/Wall View. I place two 96" high Tall Cabinets, and they both sit correctly on the floor. I take one of those into the cabinet editor, change the height to 72" but when I bring it back into the room, it appears to split the height change, so that it is now 12" off of the floor and 12" below the top of the 96" cabinet. What am I doing wrong....Thanks
Resized Tall Cabinet Elevated off of Floor
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- eCabinets Beta Tester
- Posts: 491
- Joined: Wed, Apr 15 2009, 8:22PM
- Company Name: Plymouth Custom Closets
- Country: UNITED STATES
- Location: Plympton, MA
Resized Tall Cabinet Elevated off of Floor
http://www.plymouthcustomclosets.com
Dell Precision 490/ Intel Xeon 3.20 Ghz/3 GB RAM/ Nvidia Quadro FX 3450/ Windows XP, sp 3
Dell Precision 490/ Intel Xeon 3.20 Ghz/3 GB RAM/ Nvidia Quadro FX 3450/ Windows XP, sp 3
-
- eCabinets Beta Tester
- Posts: 1237
- Joined: Mon, May 30 2005, 2:26PM
- Location: Anderson SC.
- Contact:
Re: Resized Tall Cabinet Elevated off of Floor
Nat, if you only want to resize it while in elevation view highlight the cabinet, right click and select "adjust cabinet features, resize equalize".
From there you can choose to move the top or bottom.
Forrest
From there you can choose to move the top or bottom.
Forrest
-
- eCabinets Beta Tester
- Posts: 491
- Joined: Wed, Apr 15 2009, 8:22PM
- Company Name: Plymouth Custom Closets
- Country: UNITED STATES
- Location: Plympton, MA
Re: Resized Tall Cabinet Elevated off of Floor
Thanks a million, Forrest. Thats just what I was looking for.
Nat
Nat
http://www.plymouthcustomclosets.com
Dell Precision 490/ Intel Xeon 3.20 Ghz/3 GB RAM/ Nvidia Quadro FX 3450/ Windows XP, sp 3
Dell Precision 490/ Intel Xeon 3.20 Ghz/3 GB RAM/ Nvidia Quadro FX 3450/ Windows XP, sp 3