Applying knobs and pulls

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

Post Reply
Leo Graywacz
Guru Member
Posts: 640
Joined: Tue, Jan 16 2007, 7:56PM
Company Name: LRG WoodCrafting
Location: Windsor Locks, CT
Contact:

Applying knobs and pulls

Post by Leo Graywacz »

OK, guess I'm clueless. I just can't seem to figure out how to get them to work. I've downloaded the knob/pull library. I have a cabinet in the editor, I've selected a pull, I've made a hole pattern and neither will apply.

Anyone want to walk through the steps for me please?
Dell Precision 7710
Intel Core i7-6820HQ @ 2.70GHz 16.00 GB RAM
NVIDIA Quadro M3000M
512 GB PCIe NVMe - M.2 SSD
Win 7 Pro 64-bit

http://lrgwood.com
tim lucas
Guru Member
Posts: 322
Joined: Thu, Nov 29 2007, 5:18PM
Company Name: Tim Lucas Custom Woodworks LLC
Country: UNITED STATES
Location: bell, florida
Contact:

Re: Applying knobs and pulls

Post by tim lucas »

Ok, so you have selected your knob or pull
knob.JPG
now just click the add button and a dialog box will pop up so you can locate them where you want

the hole pattern is for when you machine the doors or drawer fronts you can have the holes drilled
knob 2.JPG
Tim
Tim Lucas Custom Woodworks LLC
www.TLCW.us
Leo Graywacz
Guru Member
Posts: 640
Joined: Tue, Jan 16 2007, 7:56PM
Company Name: LRG WoodCrafting
Location: Windsor Locks, CT
Contact:

Re: Applying knobs and pulls

Post by Leo Graywacz »

OK, didn't realize it needed to be done in that editor.

But now the pull I selected doesn't have a 3D representation and doesn't show. Whatta bummer. I've tried 3 different pulls and knobs and none show. Very disappointing.
Dell Precision 7710
Intel Core i7-6820HQ @ 2.70GHz 16.00 GB RAM
NVIDIA Quadro M3000M
512 GB PCIe NVMe - M.2 SSD
Win 7 Pro 64-bit

http://lrgwood.com
tim lucas
Guru Member
Posts: 322
Joined: Thu, Nov 29 2007, 5:18PM
Company Name: Tim Lucas Custom Woodworks LLC
Country: UNITED STATES
Location: bell, florida
Contact:

Re: Applying knobs and pulls

Post by tim lucas »

Make sure your graphics card has the latest updates
Tim Lucas Custom Woodworks LLC
www.TLCW.us
Leo Graywacz
Guru Member
Posts: 640
Joined: Tue, Jan 16 2007, 7:56PM
Company Name: LRG WoodCrafting
Location: Windsor Locks, CT
Contact:

Re: Applying knobs and pulls

Post by Leo Graywacz »

It does have the latest updates. I make sure of that constantly. eCabs said there was no 3D file for the pull.
Dell Precision 7710
Intel Core i7-6820HQ @ 2.70GHz 16.00 GB RAM
NVIDIA Quadro M3000M
512 GB PCIe NVMe - M.2 SSD
Win 7 Pro 64-bit

http://lrgwood.com
Leo Graywacz
Guru Member
Posts: 640
Joined: Tue, Jan 16 2007, 7:56PM
Company Name: LRG WoodCrafting
Location: Windsor Locks, CT
Contact:

Re: Applying knobs and pulls

Post by Leo Graywacz »

Image
Dell Precision 7710
Intel Core i7-6820HQ @ 2.70GHz 16.00 GB RAM
NVIDIA Quadro M3000M
512 GB PCIe NVMe - M.2 SSD
Win 7 Pro 64-bit

http://lrgwood.com
Post Reply