cross section view
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- Senior Member
- Posts: 209
- Joined: Tue, May 17 2005, 1:05PM
- Company Name: Richmond Cabinet
- Country: UNITED STATES
- Location: Delavan, WI
cross section view
Can anyone explain why the Cross Section View options are grayed out? The help instructions are pretty clear. The cabinet is selected. The red line never appears.
Dave Egnoski
Richmond Cabinet & Millwork
Richmond Cabinet & Millwork
-
- Thermwood Team
- Posts: 702
- Joined: Fri, May 15 2015, 1:21PM
- Company Name: Thermwood Corp
- Country: UNITED STATES
Re: cross section view
Dave,
Cross section needs to be done from the front view of a wall. The wall must be selected and be at a flat view, not rotated.
-Clint-
Cross section needs to be done from the front view of a wall. The wall must be selected and be at a flat view, not rotated.
-Clint-
-
- Senior Member
- Posts: 209
- Joined: Tue, May 17 2005, 1:05PM
- Company Name: Richmond Cabinet
- Country: UNITED STATES
- Location: Delavan, WI
Re: cross section view
So I can't just take one cabinet to the LDE and get a cross section?
Thanks for the info.
Dave
Thanks for the info.
Dave
Dave Egnoski
Richmond Cabinet & Millwork
Richmond Cabinet & Millwork
-
- eCabinets Beta Tester
- Posts: 1237
- Joined: Mon, May 30 2005, 2:26PM
- Location: Anderson SC.
- Contact:
Re: cross section view
Hi David, you can take a single cabinet into LDE and rotate it 90 degrees. You can even select a side and hide it so as to see the internals.
Hope that helps, Forrest
Hope that helps, Forrest
-
- Senior Member
- Posts: 209
- Joined: Tue, May 17 2005, 1:05PM
- Company Name: Richmond Cabinet
- Country: UNITED STATES
- Location: Delavan, WI
Re: cross section view
Thanks Forrest. That's what I ended up doing. Just thought the ability to use the cross section tool would be cool.
Dave Egnoski
Richmond Cabinet & Millwork
Richmond Cabinet & Millwork
-
- Junior Member
- Posts: 69
- Joined: Tue, Sep 25 2012, 5:26PM
- Company Name: Drawn to Wood
- Country: CANADA
Re: cross section view
I too was wondering why it's in the right-click context menu in the Line Drawing Editor but greyed out! Kinda like a big tease. Why not just remove it from that menu in the LDE if it doesn't work there anyway?