Board stock getting cut off in Part Editor

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

Leo Graywacz
Guru Member
Posts: 618
Joined: Tue, Jan 16 2007, 7:56PM
Company Name: LRG WoodCrafting
Location: Windsor Locks, CT
Contact:

Board stock getting cut off in Part Editor

Postby Leo Graywacz » Wed, Dec 26 2018, 3:30PM

Since the upgrade every time I bring a board into the part editor it gets cut off. It goes in as the entire board, but very quickly you can see more than half the board disappear from view. And it's gone dimensionally, not just hidden from view. Doesn't happen with panels or cubes, just board stock.

Here's a quick video I took of the problem.

https://youtu.be/uD6pH7aXR-U
Dell Precision 7710
Intel Core i7-6820HQ @ 2.70GHz 16.00 GB RAM
NVIDIA Quadro M3000M
512 GB PCIe NVMe - M.2 SSD
Win 7 Pro 64-bit

http://lrgwood.com

Clint Buechlein
Thermwood Team
Posts: 420
Joined: Fri, May 15 2015, 1:21PM
Company Name: Thermwood Corp
Country: UNITED STATES

Re: Board stock getting cut off in Part Editor

Postby Clint Buechlein » Thu, Dec 27 2018, 8:40AM

Leo,

I see the same thing. I'll pass it along to the software engineers and go from there. It seems as though it is still there, but being rotated and cut away. You can use the Delete tool and choose Geometry Cut. The area that has been removed will show so you can bring it back. It still gets kind of weird coming out of Part Editor, but it is there at least.

-Clint-

Leo Graywacz
Guru Member
Posts: 618
Joined: Tue, Jan 16 2007, 7:56PM
Company Name: LRG WoodCrafting
Location: Windsor Locks, CT
Contact:

Re: Board stock getting cut off in Part Editor

Postby Leo Graywacz » Thu, Dec 27 2018, 8:50AM

Great, because I've already updated my video driver. If it wasn't that I don't know what it might be. Using panel stock is a pain because it gets nested. Thanks :beer:
Dell Precision 7710
Intel Core i7-6820HQ @ 2.70GHz 16.00 GB RAM
NVIDIA Quadro M3000M
512 GB PCIe NVMe - M.2 SSD
Win 7 Pro 64-bit

http://lrgwood.com

Leo Graywacz
Guru Member
Posts: 618
Joined: Tue, Jan 16 2007, 7:56PM
Company Name: LRG WoodCrafting
Location: Windsor Locks, CT
Contact:

Re: Board stock getting cut off in Part Editor

Postby Leo Graywacz » Thu, Jun 27 2019, 2:44PM

I'm having this issue again. It's with a board stock. I can see how it's being rotated when I bring it into the Contour area of the part editor. I tried editing it there but it doesn't work.

It seems if I bring in cabinet parts I don't have this issue. I just tried a cube and it also doesn't have issues.

So it seems the problem is only with board stock
Dell Precision 7710
Intel Core i7-6820HQ @ 2.70GHz 16.00 GB RAM
NVIDIA Quadro M3000M
512 GB PCIe NVMe - M.2 SSD
Win 7 Pro 64-bit

http://lrgwood.com


Return to “eCabinet Systems Software”

Who is online

Users browsing this forum: No registered users and 9 guests