Feature request Ecabinets

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

Post Reply
Thomas strembitsky
Guru Member
Posts: 293
Joined: Fri, Jul 27 2012, 12:30PM
Company Name: true form cabinets
Country: CANADA
Contact:

Feature request Ecabinets

Post by Thomas strembitsky »

Seeing as everyone else is doing I thought I would ask for something as well.
on the batch editor sidebar under adj, feature could we have a User Part name Button? You could select multiple cabinets and be able to rename multiple cabinet parts simultaneously which would save a lot of clicks. just throwing it out there
Intel(R) Core(TM) i5-6400 @ 2.70GHz 8.00 GB RAM
NVIDIA GeForce GTX 950
Windows 10 Professional 64-bit
http://www.trueform.ca
CS43 cnc
Jesse Ogburn
New Member
Posts: 23
Joined: Fri, Mar 07 2014, 7:57AM
Company Name: Ogburns Cabinet Shop Inc
Country: UNITED STATES

Re: Feature request Ecabinets

Post by Jesse Ogburn »

This seems like a good idea to me as well, I second the appeal!
Tom Nienow
Junior Member
Posts: 77
Joined: Mon, Jan 11 2010, 11:49PM
Company Name: Nienow Woodwork
Location: Pewaukee, WI

Re: Feature request Ecabinets

Post by Tom Nienow »

As long as we're asking for things, how about being able to change crown molding when in a room for all cabinets. Just a thought.
Leo Graywacz
Guru Member
Posts: 640
Joined: Tue, Jan 16 2007, 7:56PM
Company Name: LRG WoodCrafting
Location: Windsor Locks, CT
Contact:

Re: Feature request Ecabinets

Post by Leo Graywacz »

I have one that has been driving me insane lately.

When you do an operation and you come back to the editor all of your hidden parts show back up. I'm getting to the point of yelling at my computer because every time I do something I have to hide the doors and a few objects over and over again. I might as well just delete them for the time being otherwise I'm going to end up with no hair left. :wall: :wall:
Dell Precision 7710
Intel Core i7-6820HQ @ 2.70GHz 16.00 GB RAM
NVIDIA Quadro M3000M
512 GB PCIe NVMe - M.2 SSD
Win 7 Pro 64-bit

http://lrgwood.com
Clint Buechlein
Thermwood Team
Posts: 696
Joined: Fri, May 15 2015, 1:21PM
Company Name: Thermwood Corp
Country: UNITED STATES

Re: Feature request Ecabinets

Post by Clint Buechlein »

Leo Graywacz wrote:I have one that has been driving me insane lately.

When you do an operation and you come back to the editor all of your hidden parts show back up. I'm getting to the point of yelling at my computer because every time I do something I have to hide the doors and a few objects over and over again. I might as well just delete them for the time being otherwise I'm going to end up with no hair left. :wall: :wall:
An unfortunate side effect of the software rebuilding a cabinet when your return to main. If you need them out of the way for a bit, select the part, right click choose Phantom Parts, press CTRL+A to select them all, choose the button for Set Selected to Phantom in lower left corner, and click OK. If they are still showing but as red transparent in main, you can right click, hover over Visibility, and then uncheck Show Phantom Parts. They will still exist in other editors, but not be shown in the main screen. Just don't forget to unset them from Phantom Parts or they won't go to CNC.

I'll get requests added to the list.

-Clint-
Leo Graywacz
Guru Member
Posts: 640
Joined: Tue, Jan 16 2007, 7:56PM
Company Name: LRG WoodCrafting
Location: Windsor Locks, CT
Contact:

Re: Feature request Ecabinets

Post by Leo Graywacz »

I gave it a shot and turning it bright transparent red doesn't help much :joker:

I went into the visibility tab and turn show phantom parts off and the parts stayed visible.

Maybe I'm doing something wrong. :o
Dell Precision 7710
Intel Core i7-6820HQ @ 2.70GHz 16.00 GB RAM
NVIDIA Quadro M3000M
512 GB PCIe NVMe - M.2 SSD
Win 7 Pro 64-bit

http://lrgwood.com
Post Reply