Some issues with drawings/dimensions

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

User avatar
Jeremy Schiffer
eCabinets Beta Tester
Posts: 1026
Joined: Tue, May 10 2005, 9:36PM
Location: Carnesville, GA
Contact:

Some issues with drawings/dimensions

Postby Jeremy Schiffer » Thu, May 02 2019, 10:35AM

I've got a little list here of issues that I've isolated concerning auto-dimensioning, scaled print, and cross-section views:

1- Auto dimensions:
For the sake of material thickness variations, we have hardware hole patterns that protrude beyond the bounds of the cabinet (in this case, 1/8")
protruding hardware holes.JPG

You can see them in this picture, as well as the automatic dimension from the Custom Layout, which is correct at 34.5"

If I create a Scaled Drawing from this view, it is also correct.
CL scaled print.JPG
CL scaled print.JPG (19.49 KiB) Viewed 218 times


If I take this view to the Line Drawing Editor and auto-dimension it, the dimensions include the protruding hardware holes (definitely don't want that):
LDE scaled print.JPG
LDE scaled print.JPG (19.2 KiB) Viewed 218 times


2- Cross Section View
If I create a cross-section view of the cabinet, and then a Scaled Print, the scaled print does not show the cross section, rather it seems to just show an end-view of the cabinet:
scaled print cross section.JPG
scaled print cross section.JPG (12.56 KiB) Viewed 218 times


3- Print scale not printing
When printing a scaled print, the print scale shows on the screen, but does not show on the printout. (I mentioned this during the beta phase for this feature)
http://www.corlanecabinetry.com

Intel Core i7-5820 3.3GHz, 16GB RAM, NVidia Quadro K2200 4GB, Windows 8.1 Pro 64 bit

Clint Buechlein
Thermwood Team
Posts: 357
Joined: Fri, May 15 2015, 1:21PM
Company Name: Thermwood Corp
Country: UNITED STATES

Re: Some issues with drawings/dimensions

Postby Clint Buechlein » Tue, May 07 2019, 1:37PM

Jeremy,

Thanks for letting us know, I'll pass along the issues to the software engineers.

-Clint-


Return to “eCabinet Systems Software”

Who is online

Users browsing this forum: No registered users and 14 guests