Can't get top of door in corner cab to get to top

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

Leo Graywacz
Guru Member
Posts: 640
Joined: Tue, Jan 16 2007, 7:56PM
Company Name: LRG WoodCrafting
Location: Windsor Locks, CT
Contact:

Can't get top of door in corner cab to get to top

Postby Leo Graywacz » Mon, Jul 06 2020, 10:08PM

I have a frameless corner cabinet that I can't get the top of a shaker style door to adjust. It seem stuck at a few inches below the top of the cabinet.

I took a know good corner cabinet with approx the same specs and deleted the door and then tried to remake it using the cabinets original specs and I had the same problem, the door can't have the top adjusted.

I've attached the cabinet. It has the same door settings as the older cabinet I have used with success in an older kitchen. The top of the door does not adjust. Any help would be appreciated.
Attachments
Corner.jpg
Corner.jpg (8.93 KiB) Viewed 4625 times
Corner.hsf
(274.02 KiB) Downloaded 329 times
Dell Precision 7710
Intel Core i7-6820HQ @ 2.70GHz 16.00 GB RAM
NVIDIA Quadro M3000M
512 GB PCIe NVMe - M.2 SSD
Win 7 Pro 64-bit

http://lrgwood.com

Scott Marshburn
Guru Member
Posts: 836
Joined: Sat, Mar 05 2011, 7:29AM
Company Name: Heritage WoodWorks
Country: UNITED STATES
Location: Jacksonville Nc
Contact:

Re: Can't get top of door in corner cab to get to top

Postby Scott Marshburn » Tue, Jul 07 2020, 6:43AM

Hi Leo. I was able to get the door to adjust on my end by deleting the door and adding it back without making any changes to the settings that were applied to the cabinet that you posted.
Attachments
Leos Corner2.hsf
(276.02 KiB) Downloaded 345 times

Leo Graywacz
Guru Member
Posts: 640
Joined: Tue, Jan 16 2007, 7:56PM
Company Name: LRG WoodCrafting
Location: Windsor Locks, CT
Contact:

Re: Can't get top of door in corner cab to get to top

Postby Leo Graywacz » Tue, Jul 07 2020, 7:27AM

I rebooted my computer and tried again. Still having the problem. :wall:

The cabinet from my other build has the door built properly. As long as I don't change the door the cabinet is correct. As soon as I delete the door and try to rebuild it (with the same specs) it makes it short.

Not sure what's going on. Why you can get it to work and it still presents an issue for me. I've tried left and right hinges with the same results.
Dell Precision 7710
Intel Core i7-6820HQ @ 2.70GHz 16.00 GB RAM
NVIDIA Quadro M3000M
512 GB PCIe NVMe - M.2 SSD
Win 7 Pro 64-bit

http://lrgwood.com


Return to “eCabinet Systems Software”

Who is online

Users browsing this forum: No registered users and 9 guests