Toe Kick Notch On Finished End

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

Post Reply
John J. Desmond
Senior Member
Posts: 242
Joined: Wed, Oct 24 2007, 9:58PM
Company Name: American Millwork Company
Country: UNITED STATES
Location: Joplin, Missouri

Toe Kick Notch On Finished End

Post by John J. Desmond »

When I add a finished end the toe kick notch will not extend to the bottom of the face frame. How do I get that extended?
cabinet.jpg
Scott Marshburn
Guru Member
Posts: 837
Joined: Sat, Mar 05 2011, 7:29AM
Company Name: Heritage WoodWorks
Country: UNITED STATES
Location: Jacksonville Nc
Contact:

Re: Toe Kick Notch On Finished End

Post by Scott Marshburn »

Hi John, Using the Fx editor for the bottom inset on the deck you should be able to set the bottom inset for the deck to be the bottom rail width-the deck thickness. This will make the toe kick notch flush with the bottom of the bottom rail.
John J. Desmond
Senior Member
Posts: 242
Joined: Wed, Oct 24 2007, 9:58PM
Company Name: American Millwork Company
Country: UNITED STATES
Location: Joplin, Missouri

Re: Toe Kick Notch On Finished End

Post by John J. Desmond »

Thanks for the reply Scott. I will give that a try.
Post Reply