Scalable bar top

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

Post Reply
JR Allen
Junior Member
Posts: 84
Joined: Sun, Mar 16 2014, 1:48PM
Company Name: JRs Woodworx
Country: UNITED STATES

Scalable bar top

Post by JR Allen »

Can anyone give me an idea how to make L bartop similar to the attached without the sink cutout and backsplash? Tried making the cabinets / adding top/ delete the cabinets, didn't work.
main 1.jpg
main 1.jpg (4.89 KiB) Viewed 4760 times
Carmen Addamo
Senior Member
Posts: 118
Joined: Sun, Oct 19 2014, 8:33PM
Company Name: Frank Raffaele and Sons Custom
Country: UNITED STATES

Re: Scalable bar top

Post by Carmen Addamo »

try making it from a cabinet top. Make your cutout to form the "L" and then set your constraints. Resize and see if it works. Increasing the width of cabinet will size one leg and cabinet depth will size the second leg.
JR Allen
Junior Member
Posts: 84
Joined: Sun, Mar 16 2014, 1:48PM
Company Name: JRs Woodworx
Country: UNITED STATES

Re: Scalable bar top

Post by JR Allen »

Thanks Carmen, I ended up taking a pie cut susan and adjusted the size I needed then deleted everything except the full flush top which I made a phantom part. Now I can resize to fit the sizes I need and add the countertop.
bar top.jpg
Post Reply