Line Drawing Editor - Arrow size

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

Post Reply
Leo Graywacz
Guru Member
Posts: 640
Joined: Tue, Jan 16 2007, 7:56PM
Company Name: LRG WoodCrafting
Location: Windsor Locks, CT
Contact:

Line Drawing Editor - Arrow size

Post by Leo Graywacz »

Did we ever come up with a way to adjust the size of the arrowhead in the LDE?

Looked through some older posts where it was discussed but was only a proposed idea.

The size is pretty large and I'd like it to make them smaller if possible... :beer:
Dell Precision 7710
Intel Core i7-6820HQ @ 2.70GHz 16.00 GB RAM
NVIDIA Quadro M3000M
512 GB PCIe NVMe - M.2 SSD
Win 7 Pro 64-bit

http://lrgwood.com
Scott Marshburn
Guru Member
Posts: 837
Joined: Sat, Mar 05 2011, 7:29AM
Company Name: Heritage WoodWorks
Country: UNITED STATES
Location: Jacksonville Nc
Contact:

Re: Line Drawing Editor - Arrow size

Post by Scott Marshburn »

Hi Leo, In the Line drawing editor in the Right-click menu select drafting parameters then in the arrow size you can set the width and length of the arrows.
Hope this helps.
Leo Graywacz
Guru Member
Posts: 640
Joined: Tue, Jan 16 2007, 7:56PM
Company Name: LRG WoodCrafting
Location: Windsor Locks, CT
Contact:

Re: Line Drawing Editor - Arrow size

Post by Leo Graywacz »

Wouldya lookit that, there it is.

Thank you much sir :mrgreen:
Dell Precision 7710
Intel Core i7-6820HQ @ 2.70GHz 16.00 GB RAM
NVIDIA Quadro M3000M
512 GB PCIe NVMe - M.2 SSD
Win 7 Pro 64-bit

http://lrgwood.com
Post Reply