Association of Door & Drawer

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

Tabatha Yeitz
Junior Member
Posts: 59
Joined: Mon, May 22 2006, 2:10PM
Location: St. Louis, MO
Contact:

Association of Door & Drawer

Postby Tabatha Yeitz » Fri, Dec 22 2006, 9:34AM

Could anyone please tell me how it is that we are to aasociate hole patterns to the default door/drawer pulls that I have selected. It does not seem to give you the option after the part is selected as default.

Mark Taylor
Guru Member
Posts: 309
Joined: Sat, Feb 04 2006, 5:13PM
Location: Hilton Head / Bluffton SC

Postby Mark Taylor » Fri, Dec 22 2006, 10:05AM

Tabatha

In the cabinet/assembly editor go to the door/drawer editor. On the left you will see the last button on the upper section is add/Locate pulls...this will allow you to place them anywhere on the door you would like

Mark

Forrest Chapman
eCabinets Beta Tester
Posts: 1078
Joined: Mon, May 30 2005, 2:26PM
Location: Anderson SC.
Contact:

Postby Forrest Chapman » Fri, Dec 22 2006, 11:05AM

Tab,

You cannot assc. a knob or pull to a hole pattern as far as I know.

Forrest

Tabatha Yeitz
Junior Member
Posts: 59
Joined: Mon, May 22 2006, 2:10PM
Location: St. Louis, MO
Contact:

Postby Tabatha Yeitz » Fri, Dec 22 2006, 11:25AM

Seems to me that would be a great idea. The pulls also require holes to be drilled. I appreciate your help, but does anyone know for sure if this can be done?
Basically, we are trying to speed up our production by predrillling the holes that are required per our typ. cabinet. Is there anyway to lock the placement of the holes? I need them to hold the same location in relation to the cab not the same cordinate. Is this possible?

Nick M Singer
Guru Member
Posts: 828
Joined: Fri, Jun 17 2005, 12:23AM
Location: South Africa

Postby Nick M Singer » Fri, Dec 22 2006, 11:38AM

Hi Tabatha. You are not going to do this other than in the Part editor at the moment. Bit of a pain but I am sure hole/hardware association for Drawer fronts and Doors will come..... sometime


Return to “eCabinet Systems Software”

Who is online

Users browsing this forum: Bing [Bot], Google [Bot] and 5 guests