I would i create a 5 peice door that is lets say 34\" high and the top 12\" frame with glass and mullion and the bottom is full 5 peice door. Without having to create two doors?
Thank you in advance.
Custom Doors
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
Francis Gaudreau
- Junior Member
- Posts: 31
- Joined: Mon, Apr 17 2006, 1:06PM
- Location: Montreal, Qc, Canada
- Contact:
Custom Doors
Francis Gaudreau
Montreal, Qc
Montreal, Qc
-
Mark Taylor
- Guru Member
- Posts: 309
- Joined: Sat, Feb 04 2006, 5:13PM
- Location: Hilton Head / Bluffton SC
Francis...
As far as I know you would only be able to create a door like that by adding the necessary pieces from display boards and/or panels together in the cabinet editor. Each piece could even be taken into the parts editor and machined to fit together if you have or created the necessary tools/bits.
I'm not sure off the top of my head what you would use, but I know I've seen others emulate the glass as well.
Mark
As far as I know you would only be able to create a door like that by adding the necessary pieces from display boards and/or panels together in the cabinet editor. Each piece could even be taken into the parts editor and machined to fit together if you have or created the necessary tools/bits.
I'm not sure off the top of my head what you would use, but I know I've seen others emulate the glass as well.
Mark