No dovetails on d-box front when nested
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
Roger Erismann
- Senior Member
- Posts: 169
- Joined: Sun, Dec 04 2005, 11:42PM
- Location: Sacramento, CA and Rolla, Mo
No dovetails on d-box front when nested
I was hoping to do a trial run with some d-fronts tommorow and noticed that the dovetails do not show up on the d-box front #s 12 and 2 on the nesting diagram....
- Attachments
-
- no dovetails on d front.jpg (74.28 KiB) Viewed 2370 times
Wood Butcher/Case Maker
-
Todd Miller
Roger,
From the picture you have submitted, it looks like you may have the construction setting for the front of the d-box set to blind dato. Try changing the construction for that side to dovetail, then re-save. Then set the saved d-box to your default. If you want to attach the hsf file for the d-box, I can take a look at it for you...
From the picture you have submitted, it looks like you may have the construction setting for the front of the d-box set to blind dato. Try changing the construction for that side to dovetail, then re-save. Then set the saved d-box to your default. If you want to attach the hsf file for the d-box, I can take a look at it for you...