\"Failed to create empty document\" error?

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

Rick Bina
New Member
Posts: 3
Joined: Mon, Mar 05 2007, 4:49PM

\"Failed to create empty document\" error?

Postby Rick Bina » Tue, Mar 06 2007, 12:20PM

Hi- I'm new to the forum and eCabinet Systems. I have been attempting to install version 4 from the disk. The install seems to go fine, with no errors and the install wizard indicates that the software has been installed properly. When I try to start the program, I get a \"Failed to create empty document\" error and the program will not start. I have also tried uninstalling and reinstalling, and a repair install to no avail. Can anyone help?

Thanks in advance,
Rick

User avatar
Perry Pravettone
Senior Member
Posts: 148
Joined: Tue, May 17 2005, 2:15PM
Company Name: Unemployed Manager
Country: UNITED STATES
Location: Harrison Township, MI

Postby Perry Pravettone » Tue, Mar 06 2007, 12:39PM

Hi Rick and welcome to the forum. Version 4 has expired. You need to load V5 then down load the update 5.1

Perry Pravettone

Rick Bina
New Member
Posts: 3
Joined: Mon, Mar 05 2007, 4:49PM

Postby Rick Bina » Tue, Mar 06 2007, 1:32PM

I have the disks for versions 3 and 4, but not version 5. Should I put in a new request for software, or since I'm technically a registered current user, is there another avenue to use?

Thanks,
Rick

Justin D Melhiser

Postby Justin D Melhiser » Tue, Mar 06 2007, 2:02PM

Rick

I am going to get a V5 cd sent out to you. It should be about 10-14 days before you see it. Thank You and if you have any more questions feel free to call me at 1-800-533-6901 ext.227

User avatar
Jody Wilmes
Senior Member
Posts: 248
Joined: Tue, May 17 2005, 2:06PM
Company Name: Thermwood
Country: UNITED STATES
Contact:

Postby Jody Wilmes » Tue, Mar 06 2007, 2:15PM

aa
Image

User avatar
DanEpps
Wizard Member
Posts: 5852
Joined: Thu, Jul 28 2005, 10:18AM
Company Name: Dan Epps
Country: UNITED STATES
Location: Rocky Face GA

Re:

Postby DanEpps » Tue, Mar 06 2007, 2:47PM

Jody Wilmes wrote:aa


Huh?

Mike Seisser
eCabinets Beta Tester
Posts: 544
Joined: Wed, Feb 22 2006, 11:40PM
Company Name: NCB Inc.
Country: UNITED STATES

Postby Mike Seisser » Tue, Mar 06 2007, 2:51PM

Need a sponsor?
Proper Planning Prevents Poor Production.

User avatar
Jody Wilmes
Senior Member
Posts: 248
Joined: Tue, May 17 2005, 2:06PM
Company Name: Thermwood
Country: UNITED STATES
Contact:

Postby Jody Wilmes » Tue, Mar 06 2007, 2:57PM

I posted a reply, then saw Justin had already responded. Was gonna delete my post only to find that I couldn't...so I left it as \"aa\". :oops:
Image

User avatar
Jody Wilmes
Senior Member
Posts: 248
Joined: Tue, May 17 2005, 2:06PM
Company Name: Thermwood
Country: UNITED STATES
Contact:

Re:

Postby Jody Wilmes » Tue, Mar 06 2007, 2:58PM

Mike Seisser wrote:Need a sponsor?

I just got that. :lol:
and No, I don't.
Image

User avatar
DanEpps
Wizard Member
Posts: 5852
Joined: Thu, Jul 28 2005, 10:18AM
Company Name: Dan Epps
Country: UNITED STATES
Location: Rocky Face GA

Postby DanEpps » Tue, Mar 06 2007, 3:21PM

Good...I thought you were stststuttering :lol:

Rick Palechuk
Wizard Member
Posts: 1896
Joined: Wed, May 18 2005, 7:54PM
Company Name: Milltech Millworks Ltd.
Country: CANADA
Location: Edmonton, Alberta
Contact:

Postby Rick Palechuk » Tue, Mar 06 2007, 3:27PM

Coffee anyone?

User avatar
DanEpps
Wizard Member
Posts: 5852
Joined: Thu, Jul 28 2005, 10:18AM
Company Name: Dan Epps
Country: UNITED STATES
Location: Rocky Face GA

Re:

Postby DanEpps » Tue, Mar 06 2007, 3:29PM

Rick Palechuk wrote:Coffee anyone?


Wrong thread Rick :wink:

Rick Bina
New Member
Posts: 3
Joined: Mon, Mar 05 2007, 4:49PM

Re:

Postby Rick Bina » Tue, Mar 06 2007, 3:35PM

Justin D Melhiser wrote:Rick

I am going to get a V5 cd sent out to you. It should be about 10-14 days before you see it. Thank You and if you have any more questions feel free to call me at 1-800-533-6901 ext.227


Thanks, Justin. I'm really looking forward to finally learning eCabinet Systems after sitting on it for so long. As a former mechanical designer, I've been stuck in the AutoCad world too long!

Rick

Michael S Murray
eCabinets Beta Tester
Posts: 933
Joined: Tue, May 17 2005, 2:48PM
Location: Logansport, In
Contact:

Postby Michael S Murray » Tue, Mar 06 2007, 3:42PM

Jody,
You Gotta start wearing that respirator when you spray :P :P
Mike Murray
Versatile Cabinet & Solid Surface
mike@versatilecabinet.com
http://www.versatilecabinet.com


Return to “eCabinet Systems Software”

Who is online

Users browsing this forum: No registered users and 8 guests