Half my dado missing on a stretcher

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

Post Reply
Fab Tommasi
New Member
Posts: 12
Joined: Wed, Aug 16 2006, 7:55AM
Location: South Africa

Half my dado missing on a stretcher

Post by Fab Tommasi »

I have a inserted a stretcher into a cabinet. In the view on my computer screen the stretcher looks perfect. When I nest it half the tennon is missing and this is how the Thermwood wants to cut it. I have tried playing around with tennon offsets and even tried deleting the stretcher and recreaing it,but nothing seems to work. I have noticed that this particular problem only happened after we downloaded \" version 5.1 build 2\" Can anyone assist me with this problem???
Myriad Displays
Specialising in Point of Sale
Display Units & Shopfitting.
Walker T Scott

Post by Walker T Scott »

Fab
Could you post the cabinet?
Thanks
walker
Fab Tommasi
New Member
Posts: 12
Joined: Wed, Aug 16 2006, 7:55AM
Location: South Africa

Missing Half Dado

Post by Fab Tommasi »

Hi

Please find attached cabinet. I hope I did it correctly !!!

Fab
Attachments
Shelf - Type 1 - 3600.hsf
(403.74 KiB) Downloaded 253 times
Myriad Displays
Specialising in Point of Sale
Display Units & Shopfitting.
Walker T Scott

Post by Walker T Scott »

Fab

This issue has been fixed and will be in the next update. Unfortunately I cant think of a work around for this.

Walker
Fab Tommasi
New Member
Posts: 12
Joined: Wed, Aug 16 2006, 7:55AM
Location: South Africa

Post by Fab Tommasi »

Hi

Thanks, I thought I was loosing my mind !!!!! In the mean time how could I cut this part, with a DXF possibly ???

Fab
Myriad Displays
Specialising in Point of Sale
Display Units & Shopfitting.
Walker T Scott

Post by Walker T Scott »

Fab

We are sorry for the inconvenience this issue has caused you; this will be fixed in the next build. (No time frame for the next build) DFX is a possibility for cutting the stretchers that are causing the trouble.

Walker
Fab Tommasi
New Member
Posts: 12
Joined: Wed, Aug 16 2006, 7:55AM
Location: South Africa

Post by Fab Tommasi »

Hi

Thanks for your help, I will generate some DXF drawings for the part.

Thanks

Fab
Myriad Displays
Specialising in Point of Sale
Display Units & Shopfitting.
Post Reply