lost slide holes on cabinets
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- Senior Member
- Posts: 199
- Joined: Sat, Jul 29 2006, 9:11AM
- Company Name: Classic Custom Wood
- Location: NC Iowa
- Contact:
lost slide holes on cabinets
I've just noticed that I no longer show nor machine drawer slide holes on my cabinets. Have i missed something? a bug in the latest build? If not how do I get them back? The hole pattern is associated to the slide in the cabinet defaults.
-
- eCabinets Beta Tester
- Posts: 1237
- Joined: Mon, May 30 2005, 2:26PM
- Location: Anderson SC.
- Contact:
-
- Thermwood Team
- Posts: 1740
- Joined: Tue, May 17 2005, 12:44PM
- Company Name: Thermwood Corporation
- Location: Thermwood Corp: Dale, Indiana
- Contact:
Re: lost slide holes on cabinets
Ray,Ray Jorgensen wrote:I've just noticed that I no longer show nor machine drawer slide holes on my cabinets. Have i missed something? a bug in the latest build? If not how do I get them back? The hole pattern is associated to the slide in the cabinet defaults.
We had a issue where hole pattern associations would get removed (room/batch level) if a job was open/active and then the new button was selected in the cabinet editor. This issue is resolved in the latest build. But, with that issue, the pattern would no longer shop up.
Could you post the job and at least one of your cabinets from your library? Any other information on this would be helpful. You can zip the files into one file and then attach it.
Regards,
Scott Vaal
-Thermwood/eCabinet Systems-
Dell Precision / Xeon E3-1240 / 8GB RAM /NVIDIA Quadro K2000
Scott Vaal
-Thermwood/eCabinet Systems-
Dell Precision / Xeon E3-1240 / 8GB RAM /NVIDIA Quadro K2000
-
- Senior Member
- Posts: 199
- Joined: Sat, Jul 29 2006, 9:11AM
- Company Name: Classic Custom Wood
- Location: NC Iowa
- Contact:
More than happy to comply!! here's a cab and the hole pattern for a 22 in accuride glide.
- Attachments
-
- 22 in accuride.zip
- (5.16 KiB) Downloaded 275 times
-
- b_18.zip
- (278.53 KiB) Downloaded 294 times
-
- Thermwood Team
- Posts: 1740
- Joined: Tue, May 17 2005, 12:44PM
- Company Name: Thermwood Corporation
- Location: Thermwood Corp: Dale, Indiana
- Contact:
-
- Senior Member
- Posts: 199
- Joined: Sat, Jul 29 2006, 9:11AM
- Company Name: Classic Custom Wood
- Location: NC Iowa
- Contact:
I used it in a batch but never saved a size change. It very well could have been saved from a room but that would have been a few versions ago. I had holes up until shortly after the first of may. I just got my machine and the first times I cut a cab I got the holes. I noticed after tweeking fits that there were no holes. It would have been after the last update.