Hi guys.
How are you making your blind corner cabs in e-cabs? I did it before, but now when I try to resize my old cabinet or one from the \"standard\" library I get an error like \"the dimension will result in an unstable cabinet\".
Thank you,
Brent Brown
Blind Corner Frameless Base Cabinet
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- Junior Member
- Posts: 43
- Joined: Sat, Nov 19 2005, 11:38AM
-
- eCabinets Beta Tester
- Posts: 1740
- Joined: Tue, May 17 2005, 8:33PM
- Company Name: Timeless Cabinetry and Mantles
- Location: South East
Brent,
For a blind Left or Right cabinet I use a 26 1/4\" left or right (respectively) stile of the sheet stock for a face frame. I inset the stile the same thickness of the cabinet material to account for the top and sides. This will allow you to place a door as well as stretch the cabinet without any problems.
The mouse curser is located on a 26 1/4\" left stile inset at the top and left side of this cabinet. I also had to inset the top, sides and deck the same thickness as the faceframe stock.
Hope this helps.
For a blind Left or Right cabinet I use a 26 1/4\" left or right (respectively) stile of the sheet stock for a face frame. I inset the stile the same thickness of the cabinet material to account for the top and sides. This will allow you to place a door as well as stretch the cabinet without any problems.
The mouse curser is located on a 26 1/4\" left stile inset at the top and left side of this cabinet. I also had to inset the top, sides and deck the same thickness as the faceframe stock.
Hope this helps.
Intel Core i7-5820K (6-Cores, 3.3GHz, 15MB Cache)
32Gigs DDR4
NVIDIA GeForce GTX 960 4GB
SSD 840 256Gig, 2TB, 3TB, Samsung (2TB)
Corsair RM650
32Gigs DDR4
NVIDIA GeForce GTX 960 4GB
SSD 840 256Gig, 2TB, 3TB, Samsung (2TB)
Corsair RM650
-
- eCabinets Beta Tester
- Posts: 1585
- Joined: Tue, May 17 2005, 1:16PM
- Location: Norwood Pa.