error message creating nest diagrams
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
error message creating nest diagrams
When trying to generate a nest image, I am consistently getting error messages.
X DATABASE ALREADY EXISTS is the one that ALWAYS occurs,
X UNRECOGNIZED DATABASE FORMAT prgrm files/thrmwood/ecab/conestogaz/thermtemp is the other that either precedes, supercedes, but doesn't always occur.
Bottom line is: I can't generate a nest diagram, so I can't tell how my parts are being cut.
Therefore I can't edit my designs for MAXIMUM YIELD, which means I
can't recover as easily from this last week of sitting on my behind, at this computer
-that's WAY to many \"cant's\" !!!
I sent a few ESJ files to Forrest Chapman today, and he was able to open up and generate nest diagrams. While he is forwarding this dilemna over to Thermwood for investigation, I was wondering if any others have experienced anything like this? I have very limited computer knowledge (as Mike Yeargain can attest to, among others) and I suspect that this might have something to do with my settings???
X DATABASE ALREADY EXISTS is the one that ALWAYS occurs,
X UNRECOGNIZED DATABASE FORMAT prgrm files/thrmwood/ecab/conestogaz/thermtemp is the other that either precedes, supercedes, but doesn't always occur.
Bottom line is: I can't generate a nest diagram, so I can't tell how my parts are being cut.
Therefore I can't edit my designs for MAXIMUM YIELD, which means I
can't recover as easily from this last week of sitting on my behind, at this computer
-that's WAY to many \"cant's\" !!!
I sent a few ESJ files to Forrest Chapman today, and he was able to open up and generate nest diagrams. While he is forwarding this dilemna over to Thermwood for investigation, I was wondering if any others have experienced anything like this? I have very limited computer knowledge (as Mike Yeargain can attest to, among others) and I suspect that this might have something to do with my settings???
actually, the second error message I described ends with a .twt
It's c drive-program files/thermwood/ecabinets/doors/conestogaz/thermtemp.twt
I don't even HAVE any doors selected, and the nest generating area does the same thing even if I take something as simple as a standard detached toekick into there from the design editor.
It's c drive-program files/thermwood/ecabinets/doors/conestogaz/thermtemp.twt
I don't even HAVE any doors selected, and the nest generating area does the same thing even if I take something as simple as a standard detached toekick into there from the design editor.
-
- Junior Member
- Posts: 43
- Joined: Thu, Apr 06 2006, 10:29AM
- Location: Social Circle, GA
I am getting these messages too, although, I may be adding another one. The other one I'm getting is the same thing except it ends in \"c:/...../zigaba.twt\" It is doing this almost every time I shut the program down also. I just noticed that after I get this error message when I attempted to nest this cabinet and I then attempt to open up the cabinet editor via the cabinet editor button, it gives me the \"Unrecognized database format 'c:\\program files\\thermwood\\ecabinet systems\\DOORS\\Conestogaz\\zigaba.twt\" again. Maybe I need to reinstall V3 again??
- Attachments
-
- 60 inch Window Seat.esa
- (430.02 KiB) Downloaded 269 times
-
- eCabinets Beta Tester
- Posts: 979
- Joined: Thu, May 19 2005, 10:50PM
- Location: Los Alamos, CA
-
- eCabinets Beta Tester
- Posts: 593
- Joined: Tue, May 17 2005, 12:41PM
- Location: Stamford, CT USA
- Contact:
-
- Thermwood Team
- Posts: 1721
- Joined: Tue, May 10 2005, 1:26PM
- Location: Thermwood
- Contact:
Hi Guys,
I searched the forum and found this thread. Read the thread and follow the instructions. This should fix the problem.
http://www.thermwood.com/forums/viewtopic.php?t=619&
I searched the forum and found this thread. Read the thread and follow the instructions. This should fix the problem.
http://www.thermwood.com/forums/viewtopic.php?t=619&
Jason Susnjara
V.P., Marketing
Thermwood Corp.
On YouTube:
http://www.youtube.com/ThermwoodCNC
Thermwood Blog:
http://blog.thermwood.com
V.P., Marketing
Thermwood Corp.
On YouTube:
http://www.youtube.com/ThermwoodCNC
Thermwood Blog:
http://blog.thermwood.com
-
- eCabinets Beta Tester
- Posts: 593
- Joined: Tue, May 17 2005, 12:41PM
- Location: Stamford, CT USA
- Contact:
-
- eCabinets Beta Tester
- Posts: 933
- Joined: Tue, May 17 2005, 2:48PM
- Location: Logansport, In
- Contact:
Hi Dave and Jason,
Gives me a warm and fuzzy feeling knowing I am not the only sucker trying to get jobs ready for the router on a beutiful Sunday afternoon.Thats ok, will be taking a 3 day weekend and going to Canada for some smallmouth and Walleye action, next weekend. So I have to pack my 80 hr week in before!
Have a good day,
Mike
Gives me a warm and fuzzy feeling knowing I am not the only sucker trying to get jobs ready for the router on a beutiful Sunday afternoon.Thats ok, will be taking a 3 day weekend and going to Canada for some smallmouth and Walleye action, next weekend. So I have to pack my 80 hr week in before!
Have a good day,
Mike
Mike Murray
Versatile Cabinet & Solid Surface
mike@versatilecabinet.com
http://www.versatilecabinet.com
Versatile Cabinet & Solid Surface
mike@versatilecabinet.com
http://www.versatilecabinet.com
-
- Guru Member
- Posts: 366
- Joined: Fri, Aug 25 2006, 9:12AM
- Company Name: Paris Kitchens
- Country: CANADA
- Location: Paris, ontario
-
- eCabinets Beta Tester
- Posts: 933
- Joined: Tue, May 17 2005, 2:48PM
- Location: Logansport, In
- Contact:
Hey Mark,
Got a Buddy who lives in Belle River, right on lake St.Clair. We spend 4 or 5 weekends a yr up there and then he comes down and hunts with us.
Usualy the traffic is not to bad, although getting through customs at the bridge can be a bear. Thanks for the heads up.
Mike
Got a Buddy who lives in Belle River, right on lake St.Clair. We spend 4 or 5 weekends a yr up there and then he comes down and hunts with us.
Usualy the traffic is not to bad, although getting through customs at the bridge can be a bear. Thanks for the heads up.
Mike
Mike Murray
Versatile Cabinet & Solid Surface
mike@versatilecabinet.com
http://www.versatilecabinet.com
Versatile Cabinet & Solid Surface
mike@versatilecabinet.com
http://www.versatilecabinet.com
-
- Guru Member
- Posts: 366
- Joined: Fri, Aug 25 2006, 9:12AM
- Company Name: Paris Kitchens
- Country: CANADA
- Location: Paris, ontario
-
- eCabinets Beta Tester
- Posts: 933
- Joined: Tue, May 17 2005, 2:48PM
- Location: Logansport, In
- Contact:
Yes it has changed, been going many yrs.,used to just basically drive through and show your drivers liscence, not any more. We went to Northern Ontario Moose hunting(RED LAKE) last fall, and even with all the proper paperwork it was still a hassle.. I think part of the problem is that none of the american guys I go with happen to drink or smoke, when you tell them no cigarretes or booze, they immediantly go on HIGH ALERT!!NOw my Canadian buds we meet up with, thats another story!
Mike Murray
Versatile Cabinet & Solid Surface
mike@versatilecabinet.com
http://www.versatilecabinet.com
Versatile Cabinet & Solid Surface
mike@versatilecabinet.com
http://www.versatilecabinet.com