Locking up when saving
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- Junior Member
- Posts: 42
- Joined: Fri, May 25 2007, 8:55AM
Locking up when saving
I have a layout and am trying to put a countertop on it and I can get the tops on just fine but when I try to save it the system locks up. Can anyone help me with this. I am attaching the layout.
- Attachments
-
- Samantha Collier Counters and molding.zip
- (4.92 MiB) Downloaded 286 times
JLM
-
- New Member
- Posts: 21
- Joined: Wed, Jul 05 2006, 12:00PM
- Location: New Hampshire
- Contact:
-
- eCabinets Beta Tester
- Posts: 979
- Joined: Thu, May 19 2005, 10:50PM
- Location: Los Alamos, CA
-
- Wizard Member
- Posts: 1896
- Joined: Wed, May 18 2005, 7:54PM
- Company Name: Milltech Millworks Ltd.
- Country: CANADA
- Location: Edmonton, Alberta
- Contact:
-
- eCabinets Beta Tester
- Posts: 1740
- Joined: Tue, May 17 2005, 8:33PM
- Company Name: Timeless Cabinetry and Mantles
- Location: South East
I think it was Rick Deskins who discovered a work around while this is fixed.
If I am wrong I am sorry for the incorrect credit.
Take the last countertop you place into a room, into the part editor, click return, and go back to the layout room. It should save now. This should help.
If I am wrong I am sorry for the incorrect credit.
Take the last countertop you place into a room, into the part editor, click return, and go back to the layout room. It should save now. This should help.
Intel Core i7-5820K (6-Cores, 3.3GHz, 15MB Cache)
32Gigs DDR4
NVIDIA GeForce GTX 960 4GB
SSD 840 256Gig, 2TB, 3TB, Samsung (2TB)
Corsair RM650
32Gigs DDR4
NVIDIA GeForce GTX 960 4GB
SSD 840 256Gig, 2TB, 3TB, Samsung (2TB)
Corsair RM650
This is a known issue and will be fixed in the next patch. Here is a link to the original post. There is a work around just simply take a countertop to the part editor and then return you don’t have to do any thing to the countertop and it should save fine.
http://www.thermwood.com/forums/viewtop ... highlight=
walker
http://www.thermwood.com/forums/viewtop ... highlight=
walker
-
- eCabinets Beta Tester
- Posts: 1740
- Joined: Tue, May 17 2005, 8:33PM
- Company Name: Timeless Cabinetry and Mantles
- Location: South East
Re:
It appears that I was incorrect. Gene Kimmi was the one who discovered the work around. Sorry Gene.Michael Yeargain wrote:I think it was Rick Deskins who discovered a work around while this is fixed.
If I am wrong I am sorry for the incorrect credit.
Take the last countertop you place into a room, into the part editor, click return, and go back to the layout room. It should save now. This should help.
Intel Core i7-5820K (6-Cores, 3.3GHz, 15MB Cache)
32Gigs DDR4
NVIDIA GeForce GTX 960 4GB
SSD 840 256Gig, 2TB, 3TB, Samsung (2TB)
Corsair RM650
32Gigs DDR4
NVIDIA GeForce GTX 960 4GB
SSD 840 256Gig, 2TB, 3TB, Samsung (2TB)
Corsair RM650
-
- Senior Member
- Posts: 106
- Joined: Sun, May 07 2006, 9:24PM
- Location: Huron, KS
- Contact:
Mike,
No problem. More important than the credit for finding a work-around, is that one was found and we can all continue using this great software without that problem.
As I was banging my head against the wall trying to save the job I was working on, I decided to take the top to the part editor and dock the corners off. I found that this let me save the job without the lockup problem.
No problem. More important than the credit for finding a work-around, is that one was found and we can all continue using this great software without that problem.
As I was banging my head against the wall trying to save the job I was working on, I decided to take the top to the part editor and dock the corners off. I found that this let me save the job without the lockup problem.
Gene Kimmi
Lenovo W540 windows 8.1 Pro
Intel Core i-7 4800MQ @ 2.7GHz 8 GB ram
Intel HD & NVIDIA Quadro K2100M Graphics
Samsung 256 SSD Drive
Lenovo W540 windows 8.1 Pro
Intel Core i-7 4800MQ @ 2.7GHz 8 GB ram
Intel HD & NVIDIA Quadro K2100M Graphics
Samsung 256 SSD Drive
-
- Junior Member
- Posts: 42
- Joined: Fri, May 25 2007, 8:55AM
Just an update for you folks who helped me with this, there were other problems with this job that Justin couldn't recreate but when we sent him screen shots comparing his machine to ours there were differences. We sent some files for him to look at and hopefully he will figure out what happened on this job.
JLM