Please click here:
http://www.thermwood.com/forums/viewtopic.php?t=6188
or go down to the Thermwood thread and look at this post:
Would a job report generator benefit you?
Thanks,
For all Thermwood CNC owners and or operators or soon to be
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- eCabinets Beta Tester
- Posts: 284
- Joined: Tue, May 10 2005, 11:35AM
- Location: Houston, Texas
For all Thermwood CNC owners and or operators or soon to be
Michael Kowalczyk, GM
HP-Elite Quad Core Q6700-4 MB ram, Nvidia GeForce 512 MB Dual HP 22" flat panels, Windows 7 ultimate 64bit SP1
HP-Elite Quad Core Q6700-4 MB ram, Nvidia GeForce 512 MB Dual HP 22" flat panels, Windows 7 ultimate 64bit SP1
-
- eCabinets Beta Tester
- Posts: 1585
- Joined: Tue, May 17 2005, 1:16PM
- Location: Norwood Pa.
-
- eCabinets Beta Tester
- Posts: 162
- Joined: Thu, Jun 02 2005, 12:15PM
- Company Name: Chris Robinson
- Country: UNITED STATES
- Location: 2309 Capistrano St.
Michael,
Being a two person shop, I'd love to have this kind of data! The examples posed on the above thread would be nice. I used to try and keep manually recorded data on a spreadsheet but gave up on it. Took too much time.
I'd like to see average cutting speeds too.
This data would be very beneficial.
Chris
Being a two person shop, I'd love to have this kind of data! The examples posed on the above thread would be nice. I used to try and keep manually recorded data on a spreadsheet but gave up on it. Took too much time.
I'd like to see average cutting speeds too.
This data would be very beneficial.
Chris
-
- eCabinets Beta Tester
- Posts: 284
- Joined: Tue, May 10 2005, 11:35AM
- Location: Houston, Texas
Hey Chris,
Thanks for the post. Could you please outline your thoughts and needs on the Thermwood thread. I am trying to keep the info in one area but I know that many do not look at both forums all the time so that is why I posted the link. The more details we have, the easier it will be and the more I hope Thermwood will put into the development side of this.
Thanks,
Thanks for the post. Could you please outline your thoughts and needs on the Thermwood thread. I am trying to keep the info in one area but I know that many do not look at both forums all the time so that is why I posted the link. The more details we have, the easier it will be and the more I hope Thermwood will put into the development side of this.
Thanks,
Michael Kowalczyk, GM
HP-Elite Quad Core Q6700-4 MB ram, Nvidia GeForce 512 MB Dual HP 22" flat panels, Windows 7 ultimate 64bit SP1
HP-Elite Quad Core Q6700-4 MB ram, Nvidia GeForce 512 MB Dual HP 22" flat panels, Windows 7 ultimate 64bit SP1
-
- eCabinets Beta Tester
- Posts: 284
- Joined: Tue, May 10 2005, 11:35AM
- Location: Houston, Texas
Hey George,
I think you might be missing something very important from your pictures. Don't forget the Controller Cabinet. I'm sure that the layout is a work in progress but without the \"CNC Electrical Brains\" it doesn't make wood chips/dust, it just collects dust. Hope you get to plug yours in soon.
I think you might be missing something very important from your pictures. Don't forget the Controller Cabinet. I'm sure that the layout is a work in progress but without the \"CNC Electrical Brains\" it doesn't make wood chips/dust, it just collects dust. Hope you get to plug yours in soon.
Michael Kowalczyk, GM
HP-Elite Quad Core Q6700-4 MB ram, Nvidia GeForce 512 MB Dual HP 22" flat panels, Windows 7 ultimate 64bit SP1
HP-Elite Quad Core Q6700-4 MB ram, Nvidia GeForce 512 MB Dual HP 22" flat panels, Windows 7 ultimate 64bit SP1