invalid file name
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- Guru Member
- Posts: 449
- Joined: Thu, Dec 08 2005, 6:10PM
- Company Name: Williamson Finewoodwork
- Country: UNITED STATES
- Location: Capac MI
- Contact:
invalid file name
When I try to write cnc I get Invalid file name pop up ? I,m lost
Will
http://www.willmade.com
KEG/Intel Core i 7 CPU K875 @ 2.93 GHZ/12G Ram
Dual boot XP PRO/Windows 7 Nvidia Quatro 600 1Gig Ram
http://www.willmade.com
KEG/Intel Core i 7 CPU K875 @ 2.93 GHZ/12G Ram
Dual boot XP PRO/Windows 7 Nvidia Quatro 600 1Gig Ram
-
- Guru Member
- Posts: 252
- Joined: Tue, May 17 2005, 2:06PM
- Company Name: Thermwood
- Country: UNITED STATES
- Contact:
-
- Guru Member
- Posts: 449
- Joined: Thu, Dec 08 2005, 6:10PM
- Company Name: Williamson Finewoodwork
- Country: UNITED STATES
- Location: Capac MI
- Contact:
file name
the file name comes up C:\\document and settings \\ all users\\documents \\v5 test jobCab 1.esj I'm just starting on e cab training guide book so I will have a lot of questions in the next few weeks is this the best place to find answers?
Will
http://www.willmade.com
KEG/Intel Core i 7 CPU K875 @ 2.93 GHZ/12G Ram
Dual boot XP PRO/Windows 7 Nvidia Quatro 600 1Gig Ram
http://www.willmade.com
KEG/Intel Core i 7 CPU K875 @ 2.93 GHZ/12G Ram
Dual boot XP PRO/Windows 7 Nvidia Quatro 600 1Gig Ram
-
- Guru Member
- Posts: 449
- Joined: Thu, Dec 08 2005, 6:10PM
- Company Name: Williamson Finewoodwork
- Country: UNITED STATES
- Location: Capac MI
- Contact:
Batch Cabinets
I'm starting with batch Cabinets what is the ideal location to save them?
Will
http://www.willmade.com
KEG/Intel Core i 7 CPU K875 @ 2.93 GHZ/12G Ram
Dual boot XP PRO/Windows 7 Nvidia Quatro 600 1Gig Ram
http://www.willmade.com
KEG/Intel Core i 7 CPU K875 @ 2.93 GHZ/12G Ram
Dual boot XP PRO/Windows 7 Nvidia Quatro 600 1Gig Ram
-
- Guru Member
- Posts: 252
- Joined: Tue, May 17 2005, 2:06PM
- Company Name: Thermwood
- Country: UNITED STATES
- Contact:
-
- Guru Member
- Posts: 252
- Joined: Tue, May 17 2005, 2:06PM
- Company Name: Thermwood
- Country: UNITED STATES
- Contact:
Re: file name
This place is your best bet for questions. Keep in mind that you can also call in for support. Have you considered coming in for training? It would definately get you up and going quickly.Will Williamson wrote:the file name comes up C:\\document and settings \\ all users\\documents \\v5 test jobCab 1.esj I'm just starting on e cab training guide book so I will have a lot of questions in the next few weeks is this the best place to find answers?
Invalid Filename
Not knowing what edition of the workbook you are referring to, I can't tell you what page to reference, but that page is title \"CNC Output\" and is about 20 pages from the end of the book.
eCabinet Systems usings Microsoft file naming conventions, so you can not use special symbols, such as \", ', or /. Those are probably the most common naming errors.
Select the button at the bottom of the CNC Output screen that is labeled \"Browse\". You need to select and the address of where you want the file to go and the file name. If you are sending this to a Thermwood CNC and are connected via a network then your file can go straight to a folder at the machine and would be ready for the operator to load.
As Jody indicated you can address these questions directly by calling our support personnel.
Thanks,
Dennis Englert
eCabinet Systems usings Microsoft file naming conventions, so you can not use special symbols, such as \", ', or /. Those are probably the most common naming errors.
Select the button at the bottom of the CNC Output screen that is labeled \"Browse\". You need to select and the address of where you want the file to go and the file name. If you are sending this to a Thermwood CNC and are connected via a network then your file can go straight to a folder at the machine and would be ready for the operator to load.
As Jody indicated you can address these questions directly by calling our support personnel.
Thanks,
Dennis Englert
-
- Guru Member
- Posts: 449
- Joined: Thu, Dec 08 2005, 6:10PM
- Company Name: Williamson Finewoodwork
- Country: UNITED STATES
- Location: Capac MI
- Contact:
Thanks Judy Thanks Dennis
Dennis I do plan on attending training in grand Rapids I just needed a little bump to get me past this one spot I have been reading this book day and night
Will
http://www.willmade.com
KEG/Intel Core i 7 CPU K875 @ 2.93 GHZ/12G Ram
Dual boot XP PRO/Windows 7 Nvidia Quatro 600 1Gig Ram
http://www.willmade.com
KEG/Intel Core i 7 CPU K875 @ 2.93 GHZ/12G Ram
Dual boot XP PRO/Windows 7 Nvidia Quatro 600 1Gig Ram